Log Utilities - Toshiba T1960CT Maintenance Manual

3.19 Log Utilities

3.19.1 Function Description
This function logs error information generated while a test is in progress and stores the results
in RAM. The Log Utilities can store data on a floppy disk or output the data to a printer. If
the power switch is turned off, the error information will be lost. Error information is dis-
played in the following order:
1. Error count (CNT)
2. Test name (TS-NAME)
3. Subtest number (TS-NAME)
4. Pass count (PASS)
5. Error status (STS)
6. FDD/HDD or memory address (ADDR)
7. Write data (WD)
8. Read data (RD)
9. HDC status (HSTS)
10. Error status name ( ERROR STATUS NAME)
3.19.2 Operations
1. Select 5 (Log Utilities) from the DIAGNOSTICS MENU and press Enter .
Error information is logged into RAM or onto a floppy disk. This information
is displayed in the following format:
XXXXX ERRORS
CNT TS-NAME PASS STS ADDR
001 FDD 02 0000
001 FDD 01 0000
Subtest number
Test name
Error count
[[1:Next, 2:Prev, 3:Exit, 4:Clear, 5:Print, 6:FD Log Read, 7:FD Log Write]]
T1960CS/T1960CT
103 00001
180 00001
Address
Error status
Pass count
Write data
WD RD HSTS [STATUS NAME]
00 00 FDD - WRITE PROTECTED
00 00 FDD - TIME OUT ERROR
HDC status
Read data
Error status name
3-43