Toshiba T1960CT Maintenance Manual page 141

4.16 T1960CT FL Inverter Board
Removing the T1960CT FL Inverter Board
To remove the T1960CT's FL inverter board, follow the steps below and refer to Figure 4-32.
1. Turn off the power to the computer, and, if attached, disconnect the AC adapter,
power cord and all external cables connected to the computer.
2. Remove the battery pack, optional memory card, optional PCMCIA card, top
cover, and display mask as described in Sections 4.2, 4.3, 4.4, 4.5, and 4.12.
3. Remove the two M2.5x6 screws securing the FL inverter board.
4. Rotate the FL inverter board out of its seating and disconnect the FL inverter
cable from CN1 and the FL cable from CN2 on the FL inverter board.
T1960CS/T1960CT
Figure 4-32 Removing the FL Inverter Board
4-37