Toshiba T1960CT Maintenance Manual page 135

4.13 T1960CS FL Inverter Board
Removing the T1960CS FL Inverter Board
To remove the T1960CS's FL inverter board, follow the steps below and refer to Figures 4-
26 and 4-27.
1. Turn off the power to the computer, and, if attached, disconnect the AC adapter,
power cord and all external cables connected to the computer.
2. Remove the battery pack, optional memory card, optional PCMCIA card, top
cover, and display mask as described in 4.2, 4.3, 4.4, 4.5, and 4.12.
3. Remove the four M2.5x6 screws securing the display support plate (Figure 4-
26).
Figure 4-26 Removing the Display Support Plate
4. Remove the two M2.5x6 screws securing the FL inverter board (Figure 4-27).
5. Carefully rotate the FL inverter board out from right to left and disconnect the
FL inverter cable from CN1 and the two FL cables from CN2 and CN3.
T1960CS/T1960CT
Figure 4-27 Removing the FL Inverter Board
4-31