Toshiba T1960CT Maintenance Manual page 91

2. FORMAT program
(a) Selecting FORMAT displays the following message:
DIAGNOSTICS - FLOPPY DISK FORMAT : VX.XX
Drive number select (1:A, 2:B) ?
(b) Select a drive number to display the following message:
Type select (0:2DD-2DD,1:2D-2D,2:2D-2HD,3:2HD-2HD) ?
(c) Select a media/drive type number and press Enter . A message similar to
the one below will be displayed:
Warning : Disk data will be destroyed.
Insert work disk into drive A:
Press any key when ready.
(d) Remove the Diagnostics Disk from the FDD, insert the work disk, and
press any key.
The following message will be displayed when the FDD format is ex-
ecuted:
[ FDD TYPE ] : TRACK
[ FDD TYPE ] : HEAD
[ FDD TYPE ] : SECTOR = XX
Format start
After the floppy disk is formatted, the following message will appear:
Format complete
Another format (1:Yes/2:No) ?
(e) Typing 1 displays the message from Step (c) above. Typing 2 returns
the test to the DIAGNOSTICS MENU.
3. COPY program
(a) When COPY is selected, the following message appears:
FLOPPY DISK FORMAT & COPY : VX.XX
Type select (0:2DD-2DD,1:2D-2D,2:2D-2HD,3:2HD-2HD) ?
(b) Selecting a media/drive type number will display a message similar to the
one below:
Insert source disk into drive A:
Press any key when ready.
3-48
= XXX
= X
[[track, head = XXX X]]
T1960CS/T1960CT