Toshiba T1960CT Maintenance Manual page 143

4.17 T1960CT LCD Module
Removing the T1960CT Liquid Crystal Display (LCD) Module
CAUTION: The T1960CT LCD module is easily damaged. Before removing the
module, refer to Appendix A for precautions on handling.
To remove the T1960CT's Liquid Crystal Display Module, follow the steps below and refer
to Figures 4-33 to 4-35.
1. Turn off the power to the computer, and, if attached, disconnect the AC adapter,
power cord and all external cables connected to the computer.
2. Remove the battery pack, optional memory card, optional PCMCIA card, top
cover, display mask and FL inverter board as described in Sections 4.2, 4.3, 4.4,
4,5, 4.12 and 4.16.
3. Remove the three M2.5x6 screws securing the LCD module to the back frame of
the computer (Figure 4-33).
NOTE: Do not remove the screws circled in Figure 4-33. These screws secure the
metal cover to the LCD panel.
T1960CS/T1960CT
Figure 4-33 Removing the LCD Screws
4-39