Toshiba T1960CT Maintenance Manual page 114

5. Open the expansion memory slot cover on the right side of the unit (Figure 4-6).
6. Using a jeweler's screwdriver, remove the screw cover located above the function
keys, then remove the M2.5x10 screw (Figure 4-6).
NOTE: Be sure to use the correct screws when reassembling the top cover.
7. Unsnap the latches securing the top cover to the base assembly. Start by pressing
on the front of the top cover just in front of the space bar and rotate the
keyboard's front edge toward you to release the front latches (Figure 4-6).
8. Continue around the rim of the top cover until all latches are released, then care-
fully lift up the top cover (Figure 4-6).
NOTES: (1) The latch on the back left corner may catch. To release this
4-10
latch, gently move the cover back and forth to free it from the
chassis.
(2) As you remove the top cover, the RGB and PRT port protective
covers will fall away from the back of the unit.
Figure 4-6 Unlatching the Top Cover
T1960CS/T1960CT