Log Utilities - Toshiba T4900CT Manual

3.20 Log Utilities

3.20.1 Function Description
This function logs error information generated while a test is in progress and stores the results
in RAM. This function can store data on a floppy disk or output the data to a printer. If the
power switch is turned off, the error information will be lost. The error information is dis-
played in the following order:
1. Error count (CNT)
2. Test name (TS-NAME)
3. Subtest number (TS-NAME)
4. Pass count (PASS)
5. Error status (STS)
6. FDD/HDD or memory address (ADDR)
7. Write data (WD)
8. Read data (RD)
9. HDC status (HSTS)
10. Error status name ( ERROR STATUS NAME)
3.20.2 Operations
1. Select 5 and press Enter on the DIAGNOSTIC MENU to log error information
into RAM or onto a floppy disk. The error information is displayed in the follow-
ing format:
XXXXX ERRORS
CNT TS-NAME PASS STS ADDR
001 FDD 02 0000
001 FDD 01 0000
Pass count
Subtest number
Test name
Error count
[[1:Next,2:Prev,3:Exit,4:Clear,5:Print,6:FD Log Read,7:FD Log Write]]
T4900CT
WD RD HSTS [STATUS NAME]
103 00001 00 00
180 00001 00 00
Address
Error status
Read data
Write data
FDD - WRITE PROTECTED
FDD - TIME OUT ERROR
HDC status
Error status name
3-43