Toshiba T1960CT Maintenance Manual page 115

Installing the Top Cover
To install the top cover follow the steps below and refer to Figures 4-5 and 4-6.
1. Place the top cover on the computer.
2. Begin at the back and snap the top cover into place. Continue along the sides and
snap the front latches last (Figure 4-6).
3. Secure the M2.5x10 screw above the function keys and replace the screw cover
(Figure 4-6).
4. Close the display and set the RGB and PRT port protective covers in place.
5. Secure the four M2.5x6 silver screws at the back of the unit (Figure 4-5).
6. Install the optional PCMCIA card, optional memory card and battery pack as
described in Sections 4.4, 4.3, and 4.2.
T1960CS/T1960CT
4-11