Toshiba T1960CT Maintenance Manual page 142

Installing the FL Inverter Board
To install the T1960CT's FL inverter board, follow the steps below and refer to Figure 4-32.
1. Connect the FL inverter cable to CN1 and the FL cable to CN2 on the FL
inverter board.
2. Seat the FL inverter board and route the cables so they will not be pinched by
the display cover or other components.
3. Secure the FL inverter board with the two M2.5x6 screws.
4. Install the display mask, top cover, optional PCMCIA card, optional memory card
and battery pack as described in Sections 4.12, 4.5, 4.4, 4.3 and 4.2.
4-38
T1960CS/T1960CT