Page 1 Satellite Pro User’s Guide If you need assistance: ❖ Toshiba’s Support Web site pcsupport.toshiba.com ❖ Toshiba Customer Support Center Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more information, see page 162 in this guide.
Page 2 TOSHIBA AMERICA INFORMATION SYSTEMS, INC. (“TOSHIBA”), ITS AFFILIATES AND SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE. YOU AGREE THAT TOSHIBA,...
Page 3: Critical Applications
Only Peripherals complying with the FCC Class B limits may be attached to this equipment. Operation with noncompliant peripherals or peripherals not recommended by Toshiba is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer's ports.
Page 4: Industry Canada Requirement
Contact either: ❖ Toshiba’s Support Web site at pcsupport.toshiba.com. ❖ Or call the Toshiba Customer Support Center: Within the United States at (800) 457-7777 Outside the United States at (949) 859-4273 Industry Canada Requirement This Class B digital apparatus complies with Canadian ICES-003.
Page 5: Telephone Company Procedures
Toshiba Corporation, Toshiba America Information Systems, Inc. or an authorized representative of Toshiba, or the Toshiba Customer Support Center within the United States at (800) 457-7777 or Outside the United States at (949) 859-4273. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.
Page 6: Instructions For Ic Cs-03 Certified Equipment
Alarm Equipment If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. Instructions for IC CS-03 Certified Equipment NOTICE: The Industry Canada label identifies certified equipment.
Page 7: Wireless Interoperability
Wireless Interoperability The TOSHIBA Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to: ❖ The IEEE 802.11 Standard on Wireless LANs (Revision A/B/G), as defined and approved by the Institute of Electrical and Electronics Engineers.
Page 8: Wireless Lan And Your Health
The radiated output power of the TOSHIBA Wireless LAN Mini PCI Card is far below the FCC radio frequency exposure limits. Nevertheless, the TOSHIBA Wireless LAN Mini PCI Card shall be used in such a manner that the potential for human contact during normal operation is minimized. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Page 9: Canada - Industry Canada (Ic)
Canada – Industry Canada (IC) This device complies with RSS 210 of Industry Canada. The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population;...
Page 10: Eu Declaration Of Conformity
This Directive applies to EU member countries only and does not apply to end users in other countries such as the United States. Although the initial emphasis is in Europe, Toshiba is already working with design engineers, suppliers, and other partners to determine appropriate worldwide product life cycle planning and end-of-life strategies for our products.
Page 11: Vcci Class B Information
VCCI Class B Information Modem Warning Notice Conformity Statement The equipment has been approved to [Commission Decision “CTR21”] for pan- European single terminal connection to the Public Switched Telephone Network (PSTN). However, due to differences between the individual PSTNs provided in different countries/regions the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point.
Page 12: Using This Equipment In Japan
2. If this equipment causes RF interference to other radio stations, promptly change the frequency being used, change the location of use, or turn off the source of emissions. 3. Contact TOSHIBA Direct PC if you have problems with interference caused by this product to Other Radio Stations. 2. Indication The indication shown below appears on this equipment.
Page 13: Radio Approvals For Wireless Devices
This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-15-1048 Direct Dial: 03-3457-4850 Fax: 03-3457-4868 Device Authorization This device obtains the Technical Regulation Conformity Certification and...
Page 14 Andorra Austria Belgium Brazil Cambodia Chile Costa Rica Cyprus Dominican Republic Ecuador Egypt Finland French Polynesia Gibraltar Guam Honduras Iceland Ireland Japan Kuwait Liechtenstein Malawi Martinique Monaco Morocco New Zealand Oman Paraguay Poland Qatar Russia San Marino Singapore South Africa Sri Lanka Argentina CNC: 533AN_HMW: “CNC C-6367”...
Page 15 Tahiti Turk Islands United Kingdom Vatican Virgin Islands Approved Countries/Regions for the Atheros Link AR5B95 Series This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table.
Page 16 Portugal Romania Senegal Slovak Republic South Korea Sweden Thailand Ukraine Yemen Europe - Restrictions for use of 2.4 GHz Frequencies in European Community Countries België/ For private usage outside buildings across public grounds over less than Belgique: 300m no special registration with IBPT/BIPT is required. Registration to IBPT/BIPT is required for private usage outside buildings across public grounds over more than 300m.
Page 17 È necessaria la concessione ministeriale anche per l’uso interno. Verificare con i rivenditori la procedura da seguire. Nederland: License required for outdoor installations. Check with reseller for procedure to follow. Licentie verplicht voor gebruik met buitenantennes. Neem contact op met verkoper voor juiste procedure. Europe - Restrictions for Use of 5 GHz Frequencies in European Community Countries European Community...
Page 18 radar system in the area. The presence of nearby radar operation may result in temporary interruption of operation of this device. The Access Point’s radar detection feature will automatically restart operation on a channel free of radar. You may consult with the local technical support staff responsible for the wireless network to ensure the Access Point device(s) are properly configured for European Community operation.
Page 19 Spain Switzerland Trinidad United Kingdom Venezuela Approved Countries/Regions for the Realtek This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table. Albania Austria Bangladesh Bosnia...
Page 20 Serbia Slovenia Spain Switzerland Trinidad UAE (United Arab Emirates) Uruguay Vietnam Approved Countries/Regions for the Realtek This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table.
Page 21 Peru Portugal Romania Senegal Slovak Republic South Korea Sweden Thailand UAE (United Arab Emirates) Yemen Approved Countries/Regions for use for the ® Intel PRO/Wireless 3945ABG Network Connection This equipment is approved to the radio standard by the countries/regions in the following table.
Page 22 11a, 11b, 11g and 11n wireless are based on IEEE 802.11a, 802.11b, 802.11g and 802.11n respectively. The IEEE 802.11n specification has not been finalized and is currently in draft release. The TOSHIBA 11a/b/g/n Wireless LAN Adapters are based on the Draft Release, Version 1.0, of the IEEE 802.11n specification.
Page 23: Bluetooth Wireless Technology Interoperability
Always use Bluetooth cards from TOSHIBA in order to enable wireless networks over two or more (up to a total of seven) TOSHIBA portable computers using these cards. Please contact TOSHIBA computer product support on Web site http://www.toshiba-europe.com/computers/tnt/ bluetooth.htm in Europe or pcsupport.toshiba.com in the United States for...
Page 24: Bluetooth Wireless Technology And Your Health
Approved Countries/Regions for use (Bluetooth technology) ® Bluetooth Card from Toshiba equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table. Argentina Belgium...
Page 25: Regulatory Statements
The radiated output power of the Bluetooth Card from TOSHIBA is far below the FCC radio frequency exposure limits. Nevertheless, the Bluetooth Card from TOSHIBA shall be used in such a manner that the potential for human contact during normal operation is minimized.
Page 26: Export Administration Regulation
Copyright This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein.
Page 27 Atheros is a registered trademark of Atheros Communications, Inc. Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Toshiba is under license. Other trademarks and trade names are those of their respective owners.
Page 28: Table Of Contents
Contents Introduction... 35 This guide ...37 Safety icons ...38 Other icons used...38 Your computer’s features and specifications ...39 Other documentation ...39 Service options ...39 Chapter 1: Getting Started... 40 Selecting a place to work ...40 Setting up a work environment ...40 Keeping yourself comfortable ...41 Precautions...41 Important information on your computer’s...
Page 29 Using the computer for the first time ...47 Opening the display panel ...47 Turning on the power...48 Setting up your software...48 Registering your computer with Toshiba ...49 Adding optional external devices...49 Adding memory (optional) ...50 Installing a memory module ...50 Removing a memory module...56...
Page 30 Starting a program from Windows Starting a program using the Search Saving your work ...100 Printing your work ...102 Backing up your work ...103 Restoring your work ...104 Toshiba’s online resources ...104 keyboard ...95 ® keys ...96 Explorer ...99 programs and files field ...100...
Page 31 Setting battery notifications ...113 Conserving battery power ...113 Power Plans...114 Using a hot key to set the Power Plan...115 Using the TOSHIBA eco power plan...116 Changing the main battery ...116 Removing the battery from the computer ...117 Inserting a charged battery ...118 Taking care of your battery ...119...
Page 32 Using an instant password...141 Using a supervisor password...142 Using a user password ...143 Deleting a user password...144 TOSHIBA Face Recognition Utility...145 TOSHIBA PC Diagnostic Tool Utility...146 TOSHIBA HDD Protection Utility ...147 Mouse Utility...148 TOSHIBA Hardware Setup...149 USB Sleep and Charge Utility ...151 Starting the USB Sleep and Charge Utility...151...
Page 33 Battery settings ...153 TOSHIBA Zooming Utility...154 TOSHIBA Accessibility ...155 TOSHIBA eco Utility™ ...156 TOSHIBA Service Station ...157 TOSHIBA PC Health Monitor ...157 ConfigFree Getting Started...158 ConfigFree Chapter 6: If Something Goes Wrong ...162 Problems that are easy to fix ...162 Problems when you turn on the computer...163...
Page 34 Contents If you need further assistance...185 Before you contact Toshiba ...185 Contacting Toshiba ...185 Other Toshiba Internet Web sites...186 Toshiba’s worldwide offices...187 ® Appendix A: Intel Appendix B: Hot Keys/TOSHIBA Cards...190 Hot Key Cards ...190 Using the Hot Key Cards ...191 Application Cards...192...
Page 35: Introduction
You can wake the computer from Sleep mode by pressing the power button. See the “Mobile Computing” section of the Toshiba User’s Guide for more information on using power management settings to...
Page 36 (RoHS), which restricts use of lead, cadmium, mercury, hexavalent chromium, PBB, and PBDE. Toshiba requires its computer component suppliers to meet RoHS requirements and verifies its suppliers’ commitment to meeting RoHS requirements by conducting component sampling inspections during the product design approval process.
Page 37: This Guide
Toshiba’s Web site at pcsupport.toshiba.com. While Toshiba has made every effort at the time of publication to ensure the accuracy of the information provided herein, product specifications, configurations, prices, system/component/options availability are all subject to change without notice.
Page 38: Safety Icons
Introduction Safety icons Safety icons This manual contains safety instructions that must be observed to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and icons highlight these instructions as follows: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
Page 39: Your Computer's Features And Specifications
To stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at pcsupport.toshiba.com. If you have a problem or need to contact Toshiba, see Goes Wrong” on page Introduction...
Page 40: Chapter 1: Getting Started
Chapter 1 Getting Started This chapter provides tips for using your computer effectively, summarizes how to connect components, and explains what to do the first time you use your computer. The “Instruction Manual for Safety and Comfort,” that is shipped with your computer, contains important safety information.
Page 41: Keeping Yourself Comfortable
Extreme heat, cold, or humidity. ❖ Liquids and corrosive chemicals. Keeping yourself comfortable The Toshiba Instruction Manual for Safety and Comfort, included with your computer, contains helpful information for setting up your work environment and tips for working comfortably throughout the day.
Page 42 Getting Started Selecting a place to work ❖ ❖ Read the “Avoid extended contact between computer base/palm rest and skin” section in the “Instruction Manual for Safety and Comfort” that is shipped with your computer. Never place a heavy object on the computer and be careful not to drop a heavy object onto the computer.
Page 43: Important Information On Your Computer's Cooling Fan
Important information on your computer’s cooling fan Your computer may have a CPU cooling fan that cools the CPU by drawing outside air into the computer. Always make sure your computer and AC adaptor have adequate ventilation and are protected from overheating when the power is turned on or when an AC adaptor is connected to a power outlet (even if your computer is in Sleep mode).
Page 44: Connecting To A Power Source
TOSHIBA Battery Charger (that may have been provided with your computer), or use AC adaptors and battery chargers specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor or Battery Charger could cause fire or damage to the computer possibly resulting in serious injury.
Page 45 To connect AC power to the computer: Connect the power cord/cable to the AC adaptor. (Sample Illustration) Connecting the power cord/cable to the AC adaptor Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm.
Page 46: Charging The Main Battery
Getting Started Charging the main battery ❖ Glows green when the main battery is fully charged ❖ Is unlit when the main battery has discharged, the battery is not charging, or the AC adaptor is not plugged into the computer or AC outlet ❖...
Page 47: Using The Computer For The First Time
Using the computer for the first time The computer is now ready for you to turn it on and begin using it. Opening the display panel Facing the front of the computer, locate the center of the display panel. Gently raise the panel. Adjust the display to a comfortable viewing angle.
Page 48: Turning On The Power
Getting Started Using the computer for the first time Turning on the power To turn on the computer: Make sure any external devices (such as the AC adaptor, if you plan to use AC power rather than battery power) are properly connected and ready.
Page 49: Registering Your Computer With Toshiba
Product registration can be completed by either visiting the Toshiba Web site at http://www.register.toshiba.com, or by clicking Start, All Programs, My Toshiba, and then Toshiba Registration. Failure to complete Product Registration will not diminish Customer rights under the Toshiba standard limited Warranty.
Page 50: Adding Memory (Optional)
NOTE Before adding external devices or memory, Toshiba recommends setting up your software. See Installing a memory module Memory modules can be installed in the memory module slots on the base of the computer.
Page 51 Installing a memory module with the computer’s power on may damage the computer, the module, or both. The computer has two memory slots—Slot A and Slot B. You can install one or two memory modules. Before you install or remove a memory module, turn off the computer using the Start menu.
Page 52 Getting Started Adding memory (optional) Remove the main battery. For information on removing the main battery, see on page 117. (Sample Illustration) Locating the memory module slot cover Using a small Phillips screwdriver, loosen the captive screws that secure the memory module slot cover. Front of computer (Sample Illustration) Removing the memory module slot cover Remove the memory module slot cover.
Page 53 Avoid touching the connector on the memory module or on the computer. Grease or dust on the connector may cause memory access problems. Carefully remove the new memory module from its antistatic packaging, without touching its connector. Locate an empty memory module slot on the underside of the computer.
Page 54 Getting Started Adding memory (optional) Firmly press the memory module into the memory slot’s socket at approximately a 30-degree angle (to the horizontal surface of the computer). (Sample Illustration) Inserting the memory module into the socket Once the module’s connector is fully inserted into the socket, press downward on the top edge of the module to seat the module into the latches at the sides of the socket.
Page 55 Front of computer (Sample Illustration) Inserting the memory module into the slot NOTE For this model, Slot A is the slot on the right-hand side of the memory compartment, when looking from the front of the computer. Slot B is the slot on the left-hand side. If only one memory module is to be installed, it must be installed in Slot A.
Page 56: Removing A Memory Module
Getting Started Adding memory (optional) Reconnect the cables. Restart the computer. TECHNICAL NOTE: You must have at least one memory module installed for the computer to work. You can now continue setting up the computer. When the operating system has loaded, you can verify that the computer has recognized the additional memory module.
Page 57 NOTE The following screen may appear when you turn on the power: If “Start Windows If one of the Safe Mode options is highlighted, it is best to press to go into Safe Mode, then shut down and restart the system, at Enter which time Windows When Safe Mode is suggested, this could be a sign that you may...
Page 58: Checking Total Memory
Getting Started Adding memory (optional) Re-insert the main battery. For more information on inserting the main battery, see Turn the computer right side up. Be sure to remove the soft cloth from the work surface before restarting the computer. Always make sure your computer and AC adaptor have adequate ventilation and are protected from overheating when the power is turned on or when an AC adaptor is connected to a power outlet (even if your computer is in Sleep mode).
Page 59: Recovering The Internal Storage Drive
NOTE From time to time, Windows you want to allow the following program to make changes to this computer?” This is a security feature to prevent programs or people from doing things on your computer without your permission. If you were trying to perform the action, click Continue;...
Page 60: Recovering To Out-Of-Box State (Recommended Recovery Method)
DVDs/media before using your system for the first time. For more information on creating recovery DVDs/media, see “Creating recovery DVDs/media” on page ❖ The Toshiba Recovery Wizard also provides the option of erasing your internal storage drive, without restoring the information on the drive. See more information.
Page 61 Click Yes to continue. (Sample Image) Warning screen When the Toshiba Recovery Wizard opens and the Selecting a process screen displays, select Recovery of Factory Default Software and then click Next. (Sample Image) Selecting a Process screen...
Page 62: Recovering To A Custom Size Partition
Getting Started Recovering the Internal Storage Drive The Recovery of Factory Default Software screen appears. Select Recover to out-of-box state. (Sample Image) Recovery of Factory Default Software screen Click Next. A confirmation message displays reminding you that all data will be lost during the recovery process. Be sure to save your work to external media before proceeding.
Page 63 Recovering the Internal Storage Drive The “Recover to a custom size partition” option restores your C: drive to its out-of-box state, and allows you to specify the size for the C: partition. You can resize and recover the C: drive using the utilities stored on your computer’s internal storage drive or using recovery DVDs/media, if you have created such media.
Page 64 Getting Started Recovering the Internal Storage Drive When the Toshiba Recovery Wizard opens and the Selecting a process screen displays, select Recovery of Factory Default Software and then click Next. (Sample Image) Selecting a Process screen The Recovery of Factory Default Software screen appears.
Page 65: Recovering Without Changing The Internal Storage Drive Partitions
Click Next. A confirmation message displays reminding you that all data will be lost during the recovery process. Be sure to save your work to external media before proceeding. Click Next to begin the recovery. When the process is complete, a message displays indicating that the C: drive has been recovered.
Page 66 Click Yes to continue. (Sample Image) Warning screen When the Toshiba Recovery Wizard opens and the Selecting a process screen displays, select Recovery of Factory Default Software and then click Next. (Sample Image) Selecting a Process screen...
Page 67: Creating Recovery Dvds/Media
Press any key on the keyboard to restart the computer. Creating recovery DVDs/media NOTE To purchase an optional external optical drive, visit the Toshiba Web site at accessories.toshiba.com. Depending on your system configuration, you may be able to copy the internal storage drive recovery files to DVDs/media, which...
Page 68: Restoring From Recovery Dvds/Media
The recovery process deletes information stored on the internal storage drive. Be sure to save your work to external media before executing the recovery. NOTE To purchase an optional external optical drive, visit the Toshiba Web site at accessories.toshiba.com. “Restoring from recovery...
Page 69 A warning screen appears, stating that when the recovery is executed all data will be deleted and rewritten. Click Yes to continue. When the Toshiba Recovery Wizard opens and the Selecting a Process screen displays, select Recovery of Factory Default Software and then click Next.
Page 70: Erasing The Internal Storage Drive
For more information, “Recovering the Internal Storage Drive” on page To delete all data and partitions from the internal storage drive: Access the Toshiba Recovery Wizard on your internal storage drive or on your recovery DVDs/media. ❖...
Page 71 Click Next to begin erasing the internal storage drive. When the process is complete, a message displays, indicating that the internal storage drive has been erased. Press any key on the keyboard to restart the computer. Getting Started . Select Toshiba Recovery Enter...
Page 72: Checking The Internal Storage Drive Operating Status
Highlight the internal storage drive in the Volume list to display its status in the lower portion of the screen. Installing drivers and applications The Toshiba Application Installer allows you to reinstall the drivers and applications that were originally bundled with your computer. To reinstall drivers and applications: Click Start, All Programs, My Toshiba, and then TOSHIBA Application Installer.
Page 73 ❖ Zoom in for a close-up view ❖ Zoom out to see more information at once Primary control button (Sample Illustration) The TouchPad and associated control buttons Refer to the table below for specific instructions on performing each operation. NOTE The pointer is the icon (usually an arrow) that moves on the screen when you slide your finger across the TouchPad or move a mouse connected to your computer.
Page 74 Getting Started Using the TouchPad™ Do the following: Open or activate an Move the pointer to the item you want to open/activate. item Do one of the following: ❖ ❖ Right-click an item Move the pointer to the item you want to right-click.
Page 75 Do the following: Scroll continuously Begin scrolling vertically or horizontally by sliding your finger along the right or (Circular scrolling) bottom edge of the TouchPad as described above. Without lifting your finger from the TouchPad, start moving your finger in a circular motion on the TouchPad.
Page 76: Adjusting Touchpad™ Settings
TouchPad setting options vary by computer model. The TouchPad settings are accessible through the Mouse Properties option of the Windows Control Panel. For more information, please visit www.support.toshiba.com, and enter the phrase “Mouse pointer jumps around as you type” into the Search field. Disabling or enabling the TouchPad™...
Page 77: Using External Display Devices
Using external display devices Your computer comes with a built-in display, but you can also connect the following types of external display devices to the video ports described below: ❖ An HDMI™-compatible television via the HDMI Out port ❖ An external monitor or projector via the RGB (monitor) port (Sample Illustration) Video ports Connecting the display device If you are connecting a television or other video display device to...
Page 78: Directing The Display Output When You Turn On The Computer
Getting Started Using external display devices Connecting an external monitor or projector You can easily attach an external monitor or projector to your computer if you need a larger screen. To do this: Read the directions that came with the monitor to see if you first need to install new software.
Page 79: Adjusting The Quality Of The External Display
❖ Built-in display and TV (or other external video device) simultaneously ❖ Built-in display and external monitor (extended desktop) ❖ Built-in display and TV (extended desktop) ❖ Swap—Switch primary display between internal display and external monitor when using extended desktop (Sample Image) Display options window Release the Adjusting the quality of the external display...
Page 80: Connecting A Printer
Getting Started Connecting a printer Connecting a printer NOTE Your printer documentation may require you to install the printer software before physically connecting the printer to your computer. If you do not install the software as instructed by the printer manufacturer, the printer may not function correctly.
Page 81: Setting Up A Printer
Setting up a printer NOTE Some printers require a specific installation process. Refer to your printer installation guide for instructions before completing the following procedure. If your printer does not support Plug and Play, follow these steps to set it up for the first time. You only need to set up the printer once. Click Start, Control Panel, Hardware and Sound, and then under Devices and Printers, click Add a printer.
Page 82: Options For Turning Off The Computer
Getting Started Turning off the computer Options for turning off the computer Depending on the operating system installed, you have more than one option available for turning off the computer: Shut down, Hibernate, and Sleep. Each option has its advantages. ❖...
Page 83: Sleep Mode
For information on how to use and configure Hibernation mode see “Using and configuring Hibernation mode” on page Sleep mode The Sleep command places the computer into a power-saving mode. Sleep saves the current state of the computer to memory so that, when you restart the computer, you can continue working from where you left off.
Page 84: Using The Shut Down Command
Getting Started Turning off the computer Using the Shut down command The Shut down command completely shuts down the computer without saving your work or the current state of the computer. This command closes all open programs, shuts down the operating system, and then turns off your computer.
Page 85 The Edit Plan Settings window appears. Click Change advanced power settings. The Advanced settings tab of the Power Options window appears. Double-click Power buttons and lid to display the actions that you can configure. (Sample Image) Advanced settings tab of Power Options screen Select the options you want from the drop-down list.
Page 86: Using And Configuring Hibernation Mode
Getting Started Turning off the computer Restarting your computer To start the computer up again, press the power button until the ON/OFF light glows green. If you turn off the computer by closing the display panel, you can start it again by opening the display panel. Using and configuring Hibernation mode To turn off the computer using the Hibernation command: Click Start, and then click the arrow next to the Shut down...
Page 87 Click Change advanced power settings. The Advanced settings tab of the Power Options window appears. Double-click Power buttons and lid to display the actions that you can configure. (Sample Image) Advanced settings tab of Power Options screen Select Hibernate for the options you want. NOTE These options can be set separately for how they operate while the computer is running on battery power or while connected to AC...
Page 88: Using And Configuring Sleep Mode
Getting Started Turning off the computer Starting again from Hibernation mode To start up the computer from Hibernation mode, press the power button until the ON/OFF light glows green. The computer returns to the screen(s) you were using. If you put the computer in Hibernation mode by closing the display panel, you can start it again by opening the display panel.
Page 89 To use any of these methods, you first need to enable them using the Power Options feature. Click Start, Control Panel, System and Security, and then Power Options. The Power Options window appears. Click Change plan settings under the power plan to be customized.
Page 90 Getting Started Turning off the computer Click Change advanced power settings. The Advanced settings tab of the Power Options window appears. Double-click Power buttons and lid to display the actions that you can configure. (Sample Image) Advanced settings tab of Power Options screen Select Sleep for the options you want.
Page 91: Closing The Display Panel
Starting again from Sleep mode To start up the computer from Sleep mode, press the power button until the ON/OFF light glows green. The computer returns to the screen(s) you were using. If you place the computer in Sleep mode by closing the display panel, you can start it again by opening the display panel.
Page 92: Moving The Computer
You may want to secure your computer to a heavy object such as your desk. The easiest way to do this is to purchase an optional computer lock cable. For more information on purchasing a cable lock, visit accessories.toshiba.com. (Sample Illustration) Computer lock cable To secure the computer: Wrap the cable through or around some part of a heavy object.
Page 93: Chapter 2: Learning The Basics
Chapter 2 Learning the Basics This chapter gives some computing tips and provides important information about basic features. Computing tips ❖ Save your work frequently. Your work stays in the computer’s temporary memory until you save it to the internal storage drive. If the network you are using goes down and you must restart your computer to reconnect, or your battery runs out of charge while you are working, you will lose all work since you last saved.
Page 94 Learning the Basics Computing tips ❖ Back up your files to external media on a regular basis. Label the backup copies clearly and store them in a safe place. It is easy to put off backing up because it takes time. However, if your internal storage drive suddenly fails, you will lose all the data on it unless you have a separate backup copy.
Page 95: Using The Keyboard
Using the keyboard Your computer’s keyboard contains character keys, control keys, function keys, and special Windows functionality of a full-size keyboard. (Sample Illustration) Keyboard Character keys Typing with the character keys is very much like typing on a typewriter, except that: ❖...
Page 96: Ctrl, Fn, And Alt Keys
Learning the Basics Using the keyboard Ctrl, Fn, and Alt keys (Sample Illustration) Ctrl, Fn, and Alt keys , and Ctrl program you are using. For more information, see your program documentation. Function keys The function keys (not to be confused with the keys at the top of the keyboard.
Page 97: Overlay Keys
Learning the Basics Using the keyboard Overlay keys The keys with gray numbers and symbols on the front of them form the numeric and cursor overlay. This overlay lets you enter numeric data or control the cursor as you would using the 10-key keypad on a desktop computer’s keyboard.
Page 98: Starting A Program
Learning the Basics Starting a program Starting a program The easiest way to start a program is to double-click the name of the file that contains the information you want to work on. To find the file, use the Start menu or Windows If you prefer to open the program first, you have four options.
Page 99: Starting A Program From Windows
Starting a program from Windows If a program is not listed in the All Programs menu, you can start it from Windows your computer’s contents as a hierarchy or “tree.” You can easily see the contents of each drive and folder on your computer. To use this method, you should know the file name and location of the program’s executable file (this file ends with .exe).
Page 100: Starting A Program Using The Search Programs And Files Field
Learning the Basics Saving your work Starting a program using the Search programs and files field This example uses the Start menu’s Search programs and files field to start WordPad: Click Start to display the Start menu. The Search programs and files field appears at the bottom of the Start menu.
Page 101 Many programs offer a feature that saves documents at regular intervals. Check your program’s documentation to see if it has an automatic save feature. Saving files Click on the arrow in the upper-left corner of your ® Windows -based application to display the drop-down menu, and then click Save.
Page 102: Printing Your Work
Learning the Basics Printing your work File names The Windows contain up to 260 characters and can include spaces. Some applications do not support long file names and require file names limited to no more than eight characters. You may use all the letters, numbers, and other characters on the keyboard, except for these characters: \ / ? : * "...
Page 103: Backing Up Your Work
Click on the arrow in the upper-left corner of your Windows and then click Print. The program displays a Print dialog box. (Sample Image) Print dialog box Specify the print parameters. For example, the range of pages and number of copies to print. Click Print.
Page 104: Restoring Your Work
Toshiba’s online resources Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions and keep you up to date with future upgrades.
Page 105: Chapter 3: Mobile Computing
It has a number of other features that enhance its energy efficiency. Many of these energy-saving features have been preset by Toshiba. We recommend you leave these features active, allowing your computer to operate at its maximum energy efficiency, so that you...
Page 106: Running The Computer On Battery Power
EasyGuard Optimize—to enable users to customize system settings to be more productive. *Toshiba EasyGuard some of which may or may not be available on a particular Toshiba computer depending on the model selected. See easyguard.toshiba.com Running the computer on battery power The computer contains a removable Lithium-Ion (Li-Ion) battery that provides power when you are away from an AC outlet.
Page 107: Power Management
Changes to these settings may result in system performance or stability issues. Users who are not completely familiar with the power management component of the system should use the preset configuration. For assistance with setup changes, contact Toshiba’s Customer Support Center. Running the computer on battery power “Maintaining your battery”...
Page 108: Using Additional Batteries
Never leave batteries in the battery charger for more than a week at a time. Doing so may reduce the potential charge of the battery. Always use the battery charger specified by Toshiba. You can order a Toshiba battery charger from Toshiba’s Web site at accessories.toshiba.com.
Page 109: Charging The Rtc Battery
The battery may not start charging immediately under the following conditions: ❖ The battery is extremely hot or cold. To ensure that the battery charges to its full capacity, wait until it reaches room temperature (50 to 80 degrees Fahrenheit, 10 to 26 degrees Celsius).
Page 110: Monitoring Main Battery Power
Mobile Computing Monitoring main battery power The computer can be used while the RTC battery is being charged, although the charging status of the RTC battery cannot be monitored. Monitoring main battery power The computer’s main battery light gives you an indication of the main battery’s current charge.
Page 111 HINT: Be careful not to confuse the battery light ( light ( ), and the power button light (near the upper-left corner of the keyboard). When the ON/OFF light or power button light flashes amber, it indicates that the system is suspended (using the Windows operating system Sleep command).
Page 112: Determining Remaining Battery Power
Mobile Computing Monitoring main battery power Determining remaining battery power Wait at least 16 seconds after turning on the computer before trying NOTE to monitor the remaining battery power. The computer needs this time to check the battery’s remaining capacity and perform its calculations.
Page 113: Setting Battery Notifications
Setting battery notifications You can set two notifications. Each notification can be set to alert you when a specified percentage of remaining battery power has been reached. You can also set the computer to enter Sleep mode or Hibernation mode or to completely power down when the notification goes off.
Page 114: Power Plans
Mobile Computing Monitoring main battery power ❖ How much you use the internal storage drive, optical drive, diskette drives, or other optional devices ❖ Where you are working, since operating time decreases at low temperatures There are various ways in which you can conserve power and extend the operating time of your battery: ❖...
Page 115: Using A Hot Key To Set The Power Plan
Select an appropriate plan for your work environment or create your own custom plan. Click Create a power plan in the left pane to set up a new plan. NOTE To edit a plan or to edit advanced settings, continue to the following steps.
Page 116: Using The Toshiba Eco Power Plan
To learn how to access the utility, “TOSHIBA eco Utility™” on page For more information on the Toshiba eco power plan, see the Help file in the TOSHIBA eco Utility™ window. Changing the main battery When your main battery has run out of power, you have two options: plug in the AC adaptor or install a charged main battery.
Page 117: Removing The Battery From The Computer
Removing the battery from the computer To remove the battery: Save your work. Turn off the computer or place it in Hibernation mode according to the instructions in Hibernation mode” on page Unplug and remove any cables connected to the computer, including the AC adaptor.
Page 118: Inserting A Charged Battery
Mobile Computing Changing the main battery If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately. Always dispose of used battery packs in compliance with all applicable laws and regulations.
Page 119: Taking Care Of Your Battery
Slide the battery release lock to the locked position. (Sample Illustration) Locking the battery release lock Turn the computer right side up. Reconnect any cables that were removed in step 3 of “Removing the battery from the computer” on page Restart the computer.
Page 120: Maintaining Your Battery
If a battery is leaking or damaged, replace it immediately. Use protective gloves when handling a damaged battery. ❖ To replace the main battery, use an identical battery that you can purchase through the Toshiba Web site at accessories.toshiba.com. ❖ A reverse polarity condition should be avoided with all batteries.
Page 121: Disposing Of Used Batteries
If you cannot find the information you need elsewhere, call Toshiba at: (800) 457-7777. In addition, Toshiba’s recycling initiatives include recycling programs, events and consumer promotions. For details, please visit www.laptops.toshiba.com/green.
Page 122: Traveling Tips
❖ Always travel with the computer in a carrying case. Toshiba offers a choice of carrying cases for the computer. They all provide plenty of extra space for manuals, power cords, and compact discs.
Page 123: Chapter 4: Exploring Your Computer's Features
Chapter 4 Exploring Your Computer’s Features In this chapter, you will explore some of the special features of your computer. Exploring the desktop The desktop is the launching pad for everything you can do in the ® Windows operating system. You can use its features to start programs, find documents, set up system components, and perform most other computing tasks.
Page 124: Finding Your Way Around The Desktop
Exploring Your Computer’s Features Exploring the desktop Finding your way around the desktop Your computer’s desktop includes several standard features: icons, Start button, taskbar, notification area, and background pattern. Icons Start button (Sample Image) Windows Icons An icon represents a folder, file, or program that can be quickly activated by double-clicking the icon.
Page 125 Your desktop may contain other icons depending on your configuration. See Windows information on each icon and how to use it. Start button You use the Start button to: ❖ Start programs ❖ Open documents ❖ Adjust system settings ❖ Find files ❖...
Page 126: Setting Up For Communications
Exploring Your Computer’s Features Setting up for communications Setting up for communications To connect to the Internet, use an online service, or communicate across the telephone lines with another computer, you need: ❖ A browser or communications program ❖ An Internet Service Provider (ISP) or online service if you plan to use the Internet ❖...
Page 127: An Overview Of Using The Internet
Accessing a network To access a network: ❖ At the office, connect an Ethernet cable to the Network port (RJ45) on your computer. For specific information about connecting to the network, consult your network administrator. ❖ Many hotels, airports, and offices offer Wi-Fi computer has Wi-Fi their Wi-Fi An overview of using the Internet...
Page 128: Internet Service Providers
Exploring Your Computer’s Features An overview of using the Internet Internet Service Providers To connect a computer directly to the Internet, many people and businesses use an Internet Service Provider (ISP). An ISP is a company that has the equipment and the telecommunication lines necessary to maintain an Internet connection.
Page 129: Internet Features
Internet features The Internet offers many types of communication tools to help you perform many tasks. ❖ Internet email To send and receive email of your own, you need a mailbox on the Web or an email address. If you have an account with an ISP, you can probably set up an email address at the same time you sign up for the service.
Page 130: Uploading To, And Downloading Files From, The Internet
Exploring Your Computer’s Features Exploring audio features Uploading to, and downloading files from, the Internet Transferring files from one computer to another is termed uploading (transferring data from your computer to a site on the Web), or downloading (transferring data from a site on the Web to your computer).
Page 131: Using External Speakers Or Headphones
Using external speakers or headphones Your computer is equipped with a full stereo sound system with internal speakers. Instead of using the internal speakers, you can connect headphones or a pair of external stereo speakers. Before putting on headphones to listen, turn the volume down. Do not set the volume too high when using headphones.
Page 132: Using The Memory Card Reader
The Web Camera software, by default, should already be running. The Web Camera indicator light glows when the Web Camera is active. For more information on the software, click Start, All Programs, TOSHIBA, Utilities, Web Camera Application Help. Using the Memory card reader (Available on certain models)
Page 133: Removing Memory Media
When inserting memory media, do not touch the metal contacts. You could expose the storage area to static electricity, which can destroy data. Removing memory media Prepare the card for removal by clicking on the Show hidden icons button( ), if necessary, in the notification area and then selecting the Safely Remove Hardware icon.
Page 134: Chapter 5: Utilities
❖ TOSHIBA Application Installer ❖ Supervisor password ❖ User password ❖ TOSHIBA Face Recognition Utility ❖ TOSHIBA PC Diagnostic Tool Utility ❖ TOSHIBA HDD Protection Utility ❖ Mouse Utility ❖ TOSHIBA Hardware Setup ❖ USB Sleep and Charge Utility ❖...
Page 135: Toshiba Assist
TOSHIBA PC Health Monitor ❖ ConfigFree® TOSHIBA Assist The TOSHIBA Assist provides quick access to computer functions and allows you to customize a range of computer settings. To access TOSHIBA Assist, click Start, All Programs, TOSHIBA, Utilities, and then TOSHIBA Assist.
Page 136: Connect
Utilities TOSHIBA Assist Connect The features available in this category are: ❖ ConfigFree ❖ Bluetooth (Sample Image) TOSHIBA Assist window – Connect tab ® Connectivity Doctor ® Settings...
Page 137: Secure
Secure The features available in this category are: ❖ Supervisor password ❖ User password (Sample Image) TOSHIBA Assist window – Secure tab Utilities TOSHIBA Assist...
Page 138: Protect & Fix
Utilities TOSHIBA Assist Protect & Fix The features available in this category are: ❖ TOSHIBA PC Diagnostic Tool Utility ❖ TOSHIBA HDD Protection Utility (Sample Image) TOSHIBA Assist window – Protect & Fix tab...
Page 139: Optimize
Mouse Utility ❖ TOSHIBA Accessibility ❖ TOSHIBA Zooming Utility ❖ TOSHIBA Hardware Setup ❖ TOSHIBA Face Recognition Utility ❖ USB Sleep and Charge Utility ❖ TOSHIBA eco Utility™ (Sample Image) TOSHIBA Assist window – Optimize tab Utilities TOSHIBA Assist (Hardware Settings)
Page 140: Toshiba Application Installer
Utilities TOSHIBA Application Installer TOSHIBA Application Installer The TOSHIBA Application Installer allows you to reinstall the drivers and applications that were originally bundled with your computer. To reinstall drivers and applications: Click Start, All Programs, My Toshiba, and then TOSHIBA Application Installer.
Page 141: Setting Passwords
When you set a password, you must enter the password before you can work on your computer again. Toshiba supports several types of passwords on your computer: ❖ An instant password—Secures your open programs and files when leaving the computer temporarily.
Page 142: Using A Supervisor Password
Toshiba is not responsible for any losses that may occur to you, your organization or others as a result of the inability to access your computer.
Page 143: Using A User Password
Toshiba is not responsible for any losses that may occur to you, your organization or others as a result of the inability to access your computer.
Page 144: Deleting A User Password
Utilities Setting passwords To register a password for the power-on password functions: Click Start, All Programs, TOSHIBA, Utilities, and then TOSHIBA Assist. The TOSHIBA Assist window appears. On the left side, click the Secure tab. Click the User Password icon.
Page 145: Toshiba Face Recognition Utility
Toshiba does not guarantee that the face recognition utility will accurately screen out unauthorized users at all times. Toshiba is not liable for any failure or damage that might arise out of the use of the face recognition software or utility.
Page 146: Toshiba Pc Diagnostic Tool Utility
Refer to the online Help documentation within the application for additional help. NOTE The TOSHIBA PC Diagnostic Tool utility may show tests for features you do not have. This is normal and does not indicate a problem. To use the TOSHIBA PC Diagnostic Tool utility:...
Page 147: Toshiba Hdd Protection Utility
TOSHIBA HDD Protection Utility The TOSHIBA HDD Protection Utility controls your computer’s hard disk drive (HDD) protection feature, which parks the HDD whenever motion is detected on the computer. Using this utility, you can enable or disable hard disk drive (HDD) protection, and set the motion detector’s sensitivity level for AC power and battery...
Page 148: Mouse Utility
The settings you can change are divided into these categories: ❖ Buttons ❖ Pointers ❖ Pointer Options ❖ Wheel ❖ Hardware ❖ Device Settings You may see additional categories depending on your particular pointing device. Adjust the settings as desired, then click OK. TOSHIBA Assist.
Page 149: Toshiba Hardware Setup
To access it: ❖ Click Start, All Programs, TOSHIBA, Utilities, and then HWSetup, or click the TOSHIBA Hardware Settings icon in the Optimize tab of The TOSHIBA HWSetup screen appears. (Sample Image) TOSHIBA HWSetup screen – General tab options The TOSHIBA HWSetup screen may have the following tabs: ❖...
Page 150 Utilities TOSHIBA Hardware Setup Select the boot device by pressing the arrow keys, then pressing the NOTE Since the system is a quick-booting system, you must press the keys immediately after pressing the power button. ❖ Display—Allows you to change various default settings for the...
Page 151: Usb Sleep And Charge Utility
“USB Sleep and Charge function.” It also displays the remaining battery capacity. Starting the USB Sleep and Charge Utility To start this utility click Start, All Programs, TOSHIBA, Utilities, and then USB Sleep and Charge. USB Sleep and Charge...
Page 152 Utilities USB Sleep and Charge Utility ❖ NOTE When “USB Sleep and Charge function” is set to Enabled, USB bus power (DC 5V) will be supplied to the compatible port even when the power of the computer is turned OFF. USB bus power (DC 5V) is similarly supplied to the external devices which are connected to the compatible ports.
Page 153: Enabling Usb Sleep And Charge
USB Sleep and Charge window if the charge function cannot be used in Mode 4. (Sample image) TOSHIBA USB Sleep and Charge Utility In this situation, select a different mode. “USB Sleep and Charge function” may not be functional with some connected external devices even if the appropriate group is selected.
Page 154: Toshiba Zooming Utility
Acrobat ❖ Icons on the desktop To access the TOSHIBA Zooming Utility: Click Start, All Programs, TOSHIBA, Utilities, and then Zooming Utility. The TOSHIBA Zooming Utility Properties screen appears. (Sample Image) TOSHIBA Zooming Utility Properties screen Select the desired option(s).
Page 155: Toshiba Accessibility
TOSHIBA Accessibility The TOSHIBA Accessibility utility allows you to use the create a hot key combination with one of the function keys without pressing the two keys simultaneously as is usually required. Using Accessibility lets you make the press it once, release it, and then press a function key to activate the hot key function.
Page 156: Toshiba Eco Utility
Launch TOSHIBA eco Utility. The TOSHIBA eco Utility™ window appears. (Sample Image) TOSHIBA eco Utility™ window To activate the Toshiba eco power plan, select ON in the upper-left section of the screen. For more information on the Toshiba eco power plan and utility,...
Page 157: Toshiba Service Station
You may disable the TOSHIBA PC Health Monitor at any time by uninstalling the software via the Windows will automatically delete all collected information from the internal storage drive.
Page 158: Configfree
Utilities ConfigFree® The TOSHIBA PC Health Monitor software does not extend or modify Toshiba's obligations under its standard limited warranty in any way. Toshiba's standard limited warranty terms and limitations apply. ® ConfigFree NOTE All references to Bluetooth Bluetooth ®...
Page 159: Configfree ® Utilities
❖ Click the ConfigFree icon then click the desired utility. NOTE If your computer is not connected to a network, the ConfigFree icon in the notification area is displayed with an “X.” ® ConfigFree Utilities Connectivity Doctor The Connectivity Doctor lets you analyze your network connections and fix network connection problems.
Page 160 Utilities ConfigFree® Profile Settings The Profile Settings utility lets you save network settings in “profiles.” ConfigFree network settings and devices. You can switch network settings simply by selecting the profile with the desired settings. If you visit a client company occasionally, for example, you can set up a profile to match that environment and connect to the network.
Page 161 Click Open Settings. The ConfigFree Profile Settings window appears. (Sample Image) ConfigFree Profile Settings window Click Add to start the Create Profile Wizard. Utilities ConfigFree®...
Page 162: Chapter 6: If Something Goes Wrong
This chapter aims to help you solve many problems by yourself. It covers the problems you are most likely to encounter. If all else fails, contact Toshiba. You will find information on Toshiba’s support services at the end of this chapter.
Page 163: Problems When You Turn On The Computer
Click the Applications tab. If a program has stopped responding, the words “not responding” appear beside its name in the list. Select the program you want to close, then click End Task. Closing the failed program should allow you to continue working.
Page 164 If Something Goes Wrong Problems when you turn on the computer light. If the indicator is glowing, the computer is connected to a live external power source. The computer starts but when you press a key nothing happens. Verify that the active program accepts text input. Try clicking your mouse on an area where you can type text and try typing again.
Page 165 “trickle-charge” to the battery. Once the battery has been trickle-charged, it may begin working correctly again. If the trickle-charging does not prove effective, visit the Toshiba Web site at Bulletin Step-Charging the computer’s battery (click the ® Ask Iris link and search for the support bulletin by name).
Page 166: The Windows Operating System Is Not Working
The output specifications of the AC adaptor must match the input specifications of the computer. If the specifications do not match, locate and use the AC adaptor that shipped with your computer. If the specifications do match, contact Toshiba. See page 185. ®...
Page 167: Using Startup Options To Fix Problems
The Windows Using Startup options to fix problems If the operating system fails to start properly, you may have to change your system’s configuration or verify the startup procedure to fix the problem. To do this, use the options in the Startup menu. To open the Startup menu: Restart your computer.
Page 168: Internet Problems
Click one of the options listed in the window and then follow the on-screen instructions. You can connect to Support Online by clicking the Ask button and then clicking Microsoft Customer Support or by going to Toshiba support at pcsupport.toshiba.com. ®...
Page 169: Fixing A Problem With Device Manager
Fixing a problem with Device Manager Device Manager provides a way to check and change the configuration of a device. Changing the default settings using Device Manager can cause other conflicts that make one or more devices unusable. Device Manager is a configuration tool for advanced users who understand configuration parameters and the ramifications of changing them.
Page 170: Memory Problems
If Something Goes Wrong Memory problems Memory problems Incorrectly connected or faulty memory modules may cause errors that seem to be hardware or even software related. It is worthwhile checking for these first: Click Start, and then click the Shut down button in the lower-right corner of the Start menu.
Page 171 Here are some typical problems and how to solve them: The AC power light does not come on when you plug in the AC adaptor and power cord/cable. Make sure the AC adaptor and power cord/cable are firmly plugged into both the wall outlet and the computer. If the AC power light still does not come on, check that the wall outlet is working properly by plugging in a lamp or other appliance.
Page 172: Keyboard Problems
After a period of time, the battery will lose its ability to perform at maximum capacity and will need to be replaced. This is normal for all batteries. To purchase a new battery pack, see your accessories information included with your computer, or visit the Toshiba Web site at accessories.toshiba.com.
Page 173 If you are using the built-in screen, make sure the display priority is not set for an external monitor. To do this, press simultaneously (once). If this does not correct the problem, press simultaneously again to return the display priority to its previous setting.
Page 174: Disk Or Storage Drive Problems
If Something Goes Wrong Disk or storage drive problems Click Personalize, and then Display. Adjust the screen resolution and/or color quality. Click OK. The display mode is set to Simultaneous and the external display device does not work. Make sure the external monitor is capable of displaying at resolutions of 800 x 600 or higher.
Page 175 On the pop-up menu, click Properties. The drive’s Properties box appears. NOTE This feature is not available for optical drives. Click the Tools tab. Click the Check now... button. The Check Disk box appears. You can choose one or both options: ❖...
Page 176: Optical Drive (Optional) Problems
If Something Goes Wrong Optical drive (optional) problems The metal cover or a loose label may be obstructing the path into the drive. Carefully inspect the diskette. If the metal cover is loose, replace the diskette. If the label is loose, replace the label and try inserting the diskette again.
Page 177: Sound System Problems
For more information regarding supported optical media formats, refer to the complete detail specifications for your computer at pcsupport.toshiba.com. If the problem is with an optical data disc, refer to the software’s documentation and check that the hardware configuration meets the program’s needs.
Page 178: Wireless Networking Problems
If Something Goes Wrong Wireless networking problems Run the printer’s self-test to check for any problem with the printer itself. Make sure you installed the proper printer drivers as shown in “Setting up a printer” on page 81 with the printer. You may have connected the printer while the computer is on.
Page 179 ❖ Verify that the Service Set Identifier (SSID), or network name, is correct—i.e., that it matches the SSID assigned to the access point you are attempting to connect through. SSIDs are case-sensitive. ❖ Check the Windows that the Wi-Fi operating system, and that the driver is loaded. To access the Device Manager, click Start, Control Panel, System and Security, and then System.
Page 180: Develop Good Computing Habits
If Something Goes Wrong Develop good computing habits ® The Windows does not work. If you are using an external Wi-Fi adapter, or other variety), check if the adapter comes with its own management utility. If it does, the utility may be disabling the ®...
Page 181: Data And System Configuration Backup In The Windows Operating System
Get familiar with all the user’s guides provided with your computer, as well as the manuals that come with the programs and devices you purchase. Your local computer store or book store sells a variety of self-help books you can use to supplement the information in the manuals. Data and system configuration backup in the Windows system The Windows...
Page 182 If Something Goes Wrong Develop good computing habits displays a message that the restore point was successfully created. Click Close. Then, at a later time, you can re-establish your Windows configuration using the saved restore point. To do this: Click Start, All Programs, Accessories, System Tools, and then System Restore.
Page 183 Follow these steps to back up your computer or files to optical discs, or a storage drive: NOTE You cannot back up the computer while running on battery power. Connect the AC adaptor before continuing. Prepare your backup target by connecting it and/or inserting a blank optical disc in the drive.
Page 184 If Something Goes Wrong Develop good computing habits ❖ Restart the Windows Windows installation utility does not prompt you to do so. This will ensure that the installation is completed, and will clean up anything that the installation utility left behind. ❖...
Page 185: If You Need Further Assistance
Detailed Specs. Contacting Toshiba If you still need help and suspect that the problem is hardware- related, Toshiba offers a variety of resources to help you. If Something Goes Wrong If you need further assistance 151.
Page 186: Other Toshiba Internet Web Sites
Toshiba’s Technical Support Web site For technical support, or to stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at pcsupport.toshiba.com Toshiba voice contact Before calling Toshiba, make sure you have: ❖...
Page 187: Toshiba's Worldwide Offices
Germany Japan Toshiba Corporation, PCO-IO 1-1, Shibaura 1-Chome Minato-Ku, Tokyo, 105-8001 Japan Mexico Toshiba de México S.A. de C.V. Sierra Candela No.111, 6to. Piso Col. Lomas de Chapultepec. CP 11000 Mexico, DF. United Kingdom Toshiba Information Systems (U.K) Ltd. Toshiba Court...
Page 188 Toshiba’s worldwide offices United States Toshiba America Information Systems, Inc. 9740 Irvine Boulevard Irvine, California 92618 United States For more information on additional Toshiba worldwide locations, please visit: www.toshiba.co.jp/index.htm. The Rest of Europe Toshiba Europe (I.E.) GmbH Hammfelddamm 8 D-4-1460 Neuss Germany...
Page 189: Appendix A: Intel ® Display Power Saving Technology
Appendix A ® Intel Display Power Saving Technology Available on certain models. Your computer may include the Intel Technology, which reduces the computer’s power consumption and extends battery running time by adjusting the settings of the internal display. This feature can be used if the computer is: ❖...
Page 190: Appendix B: Hot Keys/Toshiba Cards
Appendix B Hot Keys/TOSHIBA Cards Hot keys and TOSHIBA Cards provide a quick way to modify selected system functions and to launch applications. There are two types of TOSHIBA Cards: Hot Key Cards and Application Cards. Hot Key Cards The Hot Key Cards are used to set or modify the following system functions: ❖...
Page 191: Using The Hot Key Cards
To use the Hot Key Cards: Press and hold the The TOSHIBA Cards appear along the top of the screen. (Sample Image) Hot Key Card display Click the Card for the system function to be modified.
Page 192: Application Cards
TOSHIBA Zooming utility For more information, refer to Zooming Utility” on page Disc Creator utility This Application Card launches the TOSHIBA Disc Creator utility. TOSHIBA Hardware Setup utility For more information, refer to Hardware Setup” on page “TOSHIBA Assist”...
Page 193: Using The Application Cards
Using the Application Cards To launch an application using the Application Cards: Press and hold the The TOSHIBA Cards display at the top of the screen. (Sample Image) TOSHIBA Card display Click the “stacked” card on the far right of the display. The Application Cards are hidden under this card.
Page 194: Hot Key Functions
Hot keys have a legend on the key indicating the option or feature the key controls. Volume Mute This TOSHIBA Card or hot key enables/disables volume mute on your computer. When volume mute is enabled, no sound will come from the speakers or headphones.
Page 195: Lock (Instant Security)
Lock (Instant security) This TOSHIBA Card or hot key blanks the display. Selecting this Card or pressing the hot key displays the following options: Fn + (Sample Image) Security options ❖ ❖ hot key function activates instant security. The user...
Page 196: Power Plan
Hot Keys/TOSHIBA Cards Hot key functions Power plan This TOSHIBA Card or hot key displays the power plans and cycles through the power plans. The properties of each power plan, and the power plans that are displayed by this function, are set in the Power Options window.
Page 197: Sleep Mode
Sleep mode This TOSHIBA Card or hot key places the computer into Sleep mode. For more information about Sleep mode, please see and configuring Sleep mode” on page Selecting this Card or pressing the hot key displays the following options:...
Page 198: Hibernation Mode
Hot Keys/TOSHIBA Cards Hot key functions Hibernation mode This TOSHIBA Card or hot key places the computer into Hibernation mode. If Hibernation mode is disabled, this hot key will not respond. For more information on Hibernation mode, see “Using and configuring Hibernation mode” on page...
Page 199: Output (Display Switch)
Output (Display switch) This TOSHIBA Card or hot key cycles through the power- on display options (only the first option is available when you do not have an external monitor attached) (the last option is available only if you are in Extended Display Mode).
Page 200: Display Brightness
Built-in Display and TV). In extended desktop mode, the image is split into two sides, one side per display device. To swap sides, select Swap Image Display. Display brightness This TOSHIBA Card decreases or increases the screen brightness. This hot key decreases the screen brightness. Fn + This hot key increases the screen brightness.
Page 201: Disabling Or Enabling Wireless Devices
Disabling or enabling wireless devices This TOSHIBA Card or hot key enables/disables the optional wireless devices installed in your computer. The wireless modes are: ❖ ❖ Fn + ❖ ❖ Selecting this Card or pressing the hot key displays the...
Page 202: Disabling Or Enabling The Touchpad
Hot Keys/TOSHIBA Cards Hot key functions Disabling or enabling the TouchPad™ This TOSHIBA Card or hot key enables/disables the TouchPad™. For more information on using the TouchPad, see the TouchPad™” on page Selecting this Card or pressing the hot key displays the...
Page 203: Zoom (Display Resolution)
Hot Keys/TOSHIBA Cards Hot key functions Zoom (Display resolution) This TOSHIBA Card or hot key switches screen resolution. Selecting this Card or pressing the hot key displays the following options: Fn + [Space bar] (Sample Image) Screen resolution options Cycle through the screen resolutions, then select the desired...
Page 204: Keyboard Hot Key Functions
Fn + This hot key turns the numeric overlay on and off. This hot key turns the scroll lock feature on and off. Fn + This hot key turns the TOSHIBA Zooming Utility to Fn + zoom out. Fn + This hot key turns the TOSHIBA Zooming Utility to zoom in.
Page 205: Appendix C: Power Cord/Cable Connectors
Appendix C Power Cord/Cable Connectors Your computer ships with the correct power supply for the country of purchase. This appendix shows the shapes of the typical AC power cord/cable connectors for various parts of the world. UL approved United Kingdom BS approved Australia AS approved...
Page 206: Glossary
Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms The following acronyms may appear in this user’s guide. BIOS CD-ROM CD-RW CMOS COM1 COM2 DIMM alternating current basic input/output system bits per second compact disc compact disc read-only memory compact disc rewrite memory...
Page 207 disk operating system dots per inch DSTN dual supertwist nematic digital versatile (or video) disc DVD-ROM digital versatile (or video) disc read-only memory enhanced capabilities port EPROM erasable programmable read-only memory eSATA external Serial Advanced Technology Attachment file allocation table Federal Communications Commission gigabyte hard disk drive...
Page 208 Glossary SCSI SDRAM SRAM SVGA Terms The following terms may appear in this user’s guide. active-matrix display — A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology. Also known as a “TFT display,” in its simplest form there is one thin film transistor (TFT) for each cell.
Page 209 application — A computer program that you use to perform tasks of a specific type. Applications include word processors, spreadsheets, and database management systems. See also program. backup — A copy of a file, usually on a removable disk, kept in case the original file is lost or damaged.
Page 210 Glossary CD — An individual compact disc. See also CD-ROM. CD-ROM (compact disc read-only memory) — A form of high- capacity storage that uses laser optics instead of magnetic means for reading data. See also CD. Compare DVD-ROM. central processing unit (CPU) — The chip that functions as the “brain” of the computer.
Page 211 cursor — An on-screen symbol (usually a flashing vertical line) that indicates the position where characters will appear when you enter data. default — The setting selected by a program when the user does not specify an alternative setting. device — A component attached to the computer. Devices may be external (outside the computer’s case) or internal (inside the computer’s case).
Page 212 Glossary document — Any file created with an application and, if saved to disk, given a name by which it can be retrieved. See also file. double-click — To press and release the pointing device’s primary button rapidly twice without moving the pointing device. In the Windows button, unless otherwise stated.
Page 213 file — A collection of related information, saved on disk with a unique name. A file may be a program, information used by a program, or a document. See also document. file allocation table (FAT) — The section of a storage drive that keeps track of the location of stored files.
Page 214 Glossary Hibernation — A feature of many Toshiba computers that saves to the internal storage drive the current state of your work, including all open files and programs, when you turn the computer off. When you turn on the computer again, your work is returned to the same state it was when the computer was turned off.
Page 215 liquid crystal display (LCD) — A type of display that uses a liquid substance between two transparent electrode panels. When an electric current passes through the electrodes, the molecules in the liquid form a crystalline pattern that polarizes the light passing through it.
Page 216 Glossary network — A collection of computers and associated devices that are connected by communications facilities. A network allows you to share data and peripheral devices, such as printers, with other users and to exchange electronic mail. non-interlaced — A method of refreshing a computer screen, in which each pixel of every line is refreshed as the electron beam scans across and down the screen.
Page 217 Plug and Play — Generally, refers to the computer’s ability to automatically configure itself to work with peripheral devices. When capitalized, refers to a standard that, when followed by a device manufacturer, allows a computer to configure itself automatically to work with the device. pointer —...
Page 218 Glossary restart — Synonymous with reboot. To reset the computer by reloading the operating system without turning the computer off. See also boot. RGB (Red, Green, Blue) monitor — A monitor that reproduces all colors by mixing red, green, and blue light in various combinations. RJ11 connector —...
Page 219 system disk — A diskette that contains the operating system files needed to start the computer. Any diskette can be formatted as a system disk. A system disk is also called a “bootable disk” or a “startup disk.” Compare non-system disk. system prompt —...
Page 220: Index
113 power plan 196 power plan hot key 115 real-time clock (RTC) 107 remaining power 112 removing 117 safety precautions 119 BIOS Setup see TOSHIBA Hardware Setup button power 48 start 125 Call2Recycle™ battery 122 changing main battery 116...
Page 221 cleaning 91 moving 92 non-system disk or disk error message 165 not accessing disk drives 164 running on battery power 106 setting up 43 warning resume failure message computer lock 92 computing tips 93 ConfigFree® 158 Connectivity Doctor 159 profile settings 160 starting 158 connecting AC adaptor 44...
Page 222 Index HDMI™ Out Port 77 headphones using 131 Help and Support Windows® operating system 168 Hibernation mode 82 configuring 86 hot key 198 starting again from 88 hot key disabling or enabling TouchPad™ disabling or enabling wireless devices 201 display brightness 200 Hibernation mode 198 keyboard overlays 204 Lock (Instant security) 195...
Page 223 175 cannot read a diskette 176 changing display properties 173 checking device properties 169 computer will not power up 163 contacting Toshiba 185 corrupted/damaged data files 175 Device Manager 169 disk drive is slow 175 display is blank 172...
Page 224 Index Internet connection is slow 168 keyboard not responding 164 keyboard produces unexpected characters 172 missing files/trouble accessing a drive 174 no sound 177 non-system disk or disk error 165 power and batteries 170 printer 177 program not responding 162 program not working properly screen does not look right/flickers Startup options 167...
Page 225 TOSHIBA eco Utility 156 TOSHIBA Face Recognition Utility TOSHIBA Hardware Setup 149 TOSHIBA HDD Protection Utility Toshiba online resources 104 TOSHIBA PC Diagnostic Tool Utility TOSHIBA PC Health Monitor 157 TOSHIBA Service Station 157 TOSHIBA Zooming Utility 154 TouchPad™ adjusting settings 76...

This manual is also suitable for:

T130-w1302 T110-ez1110 T115-s1100 Satellite pro t130

Toshiba T130-EZ1301 User Manual

Chapter 1: Getting Started

Chapter 2: Learning the Basics

Chapter 3: Mobile Computing

Chapter 4: Exploring Your Computer's Features

Chapter 5: Utilities

Chapter 6: If Something Goes Wrong

Appendix A: Intel ® Display Power Saving Technology

Appendix B: Hot Keys/Toshiba Cards

Appendix C: Power Cord/Cable Connectors

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Toshiba T130-EZ1301

Summary of Contents for Toshiba T130-EZ1301