Keyboard Test - Toshiba T1960CT Maintenance Manual

3.6

Keyboard Test

To execute the Keyboard Test, select 3 from the DIAGNOSTIC TEST Menu, press Enter
and follow the directions displayed on the screen. The Keyboard test contains two subtests
that test the T1960CS/T1960CT's keyboard actions. Move the highlight bar to the subtest
you want to execute and press Enter .
Subtest 01 Pressed key display (82/84)
NOTE: The Num Lock and the Overlay mode must be off to execute this
subtest.
When you execute this subtest, the keyboard layout is drawn on the display as
shown below. When any key is pressed, the corresponding key on the screen
changes to an "*" character. Holding a key down enables the auto-repeat
function which causes the key's display character to blink.
KEYBOARD TEST
PrtSc
Pause
If test OK, Press [Del] then [Enter] Key
To exit this test, press Del and Enter .
3-12
IN PROGRESS
: [Alt] + [SysReq]
: [Ctrl]+[Break] to test end
301000
T1960CS/T1960CT