Toshiba T1960CT Maintenance Manual page 117

Installing the Keyboard
To install the keyboard, follow the steps below and refer to Figures 4-7 and 4-8.
1. Connect the keyboard cable to pressure plate connector PJ4 on the upper
system board (Figure 4-7).
2. Seat the keyboard in the computer. Note that a fold is built into the keyboard
cable. Do not try to bend the cable at any other point when you install the key-
board (Figure 4-8).
3. Install the top cover, optional PCMCIA card, optional memory card and battery
pack as described in Sections 4.5 through 4.2.
T1960CS/T1960CT
Figure 4-8 Seating the Keyboard
4-13