Toshiba T1960CT Maintenance Manual page 48

Select the desired subtest from the menu and press Enter . The following message
5.
appears:
TEST LOOP
Selecting YES sets the test to run continuously until it is halted by the user. Select-
ing NO returns the screen to the main menu after the test is complete.
6. The following message appears:
ERROR STOP : YES
Use the left or right arrow keys to move the cursor to the desired option and press
Enter .
Selecting YES stops the test program when an error is found and displays the
operation guide on the right side of the display screen as shown below.
ERROR STATUS NAME
The three selections have the following functions:
1:
2:
3:
Selecting NO keeps the test running even if an error is found.
Use the arrow keys to move the cursor to the desired option and press Enter .
7.
Table 3-1 in Section 3.3 lists the function of each test on the subtest menu. Table
3-3 in Section 3.15 lists error codes and the status of each error.
T1960CS/T1960CT
: YES
[[ HALT OPERATION ]]
Terminates the test program and exits to the subtest menu.
Continues the test.
Restarts the test from the error.
1: Test end
2: Continue
3: Retry
3-5