Toshiba T1960CT Maintenance Manual page 82

2. Good track FORMAT
This option formats a specified cylinder and track as a good track. If a good
track is formatted as a bad track, use this option to change the track to a good
track.
3. Bad track FORMAT
This option formats a specified cylinder and track as a bad track. If a bad
track is detected, use this option to label it as a bad track.
4. Bad track CHECK
This option searches the hard disk for bad tracks by reading data to all the
tracks on the hard disk. A list of bad tracks is displayed when the program is
complete. If an error other than a bad track is detected, the program is
automatically terminated.
3.17.2 Operations
CAUTION: The contents of the hard disk will be erased when this program is
executed. Before executing the function, transfer the contents of the hard disk onto a
backup system. This can be done with the Toshiba MS-DOS BACKUP command.
See the Toshiba MS-DOS manual for details.
Select TEST 2 (Hard Disk Format) from the DIAGNOSTIC MENU and press Enter . The
following selections display:
DIAGNOSTICS - HARD DISK FORMAT : VX.XX
1 - All track FORMAT
2 - Good track FORMAT
3 - Bad track FORMAT
4 - Bad track CHECK
9 - Go to TEST MENU
↑ ↓ → ← : Select items, Enter: Finish, Esc: Exit
T1960CS/T1960CT
3-39