Toshiba T1960CT Maintenance Manual page 137

4.14 T1960CS LCD Module
Removing the Color LCD Module
To remove the T1960CS's color LCD module, follow the steps below and refer to Figure 4-
28.
1. Turn off the power to the computer, and, if attached, disconnect the AC adapter,
power cord and all external cables connected to the computer.
2. Remove the battery pack, optional memory card, optional PCMCIA card, top
cover, display mask, display assembly and inverter board as described in Sections
4.2, 4.3, 4.4, 4.5, 4.12, 4.8, and 4.13.
3. Remove the M2.5x6 screw securing the LCD module to the LCD cover.
4. Carefully rotate the LCD module from right to left out of the display cover and
disconnect the three display cables from the LCD module.
Figure 4-28 Removing the T1960CS's LCD Module
Installing the T1960CS LCD Module
To install the T1960CS's LCD module, follow the steps below and refer to Figure 4-28.
1. Connect the three display cables to the LCD module, and carefully rotate the
LCD module into the LCD cover.
2. Secure the M2.5x6 screw on the LCD module.
3. Install the FL inverter board, display assembly, display mask, top cover, optional
PCMCIA card, optional memory card and battery pack as described in Sections
4.13, 4.8, 4.12, 4.5, 4.4, 4.3 and 4.2.
T1960CS/T1960CT
4-33