Toshiba T1960CT Maintenance Manual page 123

Figure 4-15 Removing the System Board Cover
7. Disconnect the two display cables from PJ8 and PJ9 on the system board (Figure
4-16).
8. Disconnect the display sensor switch cable from PJ6 on the system board.
9. Remove the M2.5x6 silver screw at the back right corner of the computer.
10. Lay the display back fully, (put a book or small box behind the display to support
it) and remove the two M2.5x8 silver screws on the display hinges securing the
display (Figure 4-16).
11. Lift off the display assembly (Figure 4-16).
T1960CS/T1960CT
Figure 4-16 Removing the Display Assembly
4-19