3.23.5
Factory Preset Configuration
When you access SETUP, the current configuration is displayed.
To show the factory preset configuration, press Home .
1.
To accept the default settings, press End and then press Y .
2.
3.23.6
SETUP Options
The SETUP screen is divided into functionally related groups. This section describes each
group and its options.
1.
Memory
This option lists the computer's memory allocations. Values are automatically
calculated by the computer.
(a)
Total
Displays the total amount of memory installed.
(b)
Base
Displays the amount of base (conventional) memory (640 KB).
(c)
Extended Memory
Displays the amount of extended memory the computer has available.
(d)
Shadow BIOS ROM
Displays 128 KB of RAM, which is reserved for the Shadow BIOS ROM.
2.
Display
These options help you configure the computer's display.
(a)
Display Adapter
Displays the internal adapter for the VGA internal display. Only VGA
compatible is displayed. You cannot change it.
(b)
LCD Display Mode
Sets the computer's display mode.
3-54
T1960CS/T1960CT