Arctic Cat 2013 Prowler XT Service Manual page 70

2. Acceptable width range must not exceed specifica-
tions.
COUNTERSHAFT
CAUTION
When disassembling the countershaft, care must be
taken to note the direction each major component (dog,
gear) faces. If a major component is installed facing the
wrong direction, transmission damage may occur
and/or the transmission will malfunction. In either case,
complete disassembly and assembly will be required.
Disassembling
1. Remove the shift forks noting the positions for assem-
bling; then remove the high driven gear outer washer,
high driven gear, high driven gear bearing, high driven
gear bushing, and high driven gear inner washer.
2. Remove the drive gear; then remove the snap ring
securing the reverse driven gear dog and bushing to
the countershaft.
ATV-1017
GZ281A
3. Remove the reverse driven gear dog.
4. Remove the snap ring securing the reverse driven
gear and washer; then remove the washer and gear.
GZ283A
GZ296
3
GZ312
GZ313A
GZ314
3-43