Arctic Cat 2013 Prowler XT Service Manual page 59

4. Remove the fixed drive face and V-belt.
5. Using an impact driver, remove the cap screws
securing the air intake plate; then remove the plate
cushion.
6. Remove the cap screws securing the clutch cover.
Note the location of the different-lengthed cap
screws for installing purposes. Using a rubber mallet,
carefully remove the cover. Account for two align-
ment pins.
CAUTION
Care must be taken when removing the cover so the
cover gasket is not damaged.
3-32
PR388
 NOTE: For steps 7-13, refer to illustration PR398B.
 NOTE: To aid in installing, it is recommended the
assemblies are kept together and IN ORDER.
PR393
KEY
A. Oil Pump Driven Gear
B. Oil Pump Drive Gear
C. Clutch Shoe Assembly
7. Remove the one-way clutch (D) from the clutch
housing. Note the location of the green dot (or the
word OUTSIDE) for installing purposes.
8. Using a hydraulic press, remove the clutch housing
assembly from the clutch cover. Account for the left
fixed drive spacer and an O-ring inside the fixed
drive spacer.
CD973A
CD974A
D. One-Way Clutch
(Green Dot MUST Show)
E. Final Drive Carrier Bearing
Housing
PR398B
CF085