Arctic Cat 2013 Prowler XT Service Manual page 125

4. Install the countershaft gear onto the countershaft
and secure with a snap ring (flat-side away from the
gear).
5. Using rubber bands to support the connecting rods,
carefully install the crankshaft assembly into the
crankcase.
 NOTE: It will be necessary to rotate the crankshaft
back and forth to engage the teeth of the oil pump
and countershaft gears.
6. Install the driveshaft; then with a flat washer on each
end of the reverse idler assembly, install into the
crankcase.
3-98
GZ463A
7. Install the gear shift shaft into the crankcase making
sure the flat washer is in place on the right case end
and the spacer on the gear shift stop end.
GZ299A
GZ474
GZ332
GZ333
DE677A
GZ335