Arctic Cat 2013 Prowler XT Service Manual page 130

9. Install the two springs (A) at the juncture of front and
rear exhaust pipes. With a new grafoil seal (B) in
place, install the muffler and secure with two
springs; then tighten the cap screws from steps 7 and
8 to 20 ft-lb.
10. Connect the oil cooler hoses to the engine and secure
with the hose clamps. Tighten securely.
PR643A
PR642
11. Install the inlet boot on the CVT cover; then install
the CVT cooling duct and secure with the sheet
metal screw. Tighten all fasteners and clamps
securely.
PR661C
PR668
PR616A
3
PR617A
PR615
PR671A
3-103