Arctic Cat 2013 Prowler XT Service Manual page 34

8. Loosen the clamp (A) securing the air intake boot to
the throttle body and the clamp (B) securing the air
filter housing to the inlet housing boot; then remove
the crankcase breather hose from the crankcase.
9. Remove two self-tapping screws securing the air fil-
ter mounting bracket to the frame; then remove the
air filter and mounting bracket as an assembly.
10. Remove the throttle arm cover from the throttle
body; then disconnect and remove the throttle cable
and the throttle body.
PR598A
11. Remove the coolant hoses from the water pump and
thermostat housings; then position the upper coolant
line to the left-side of the engine compartment.
12. Remove the exhaust duct from the V-belt housing;
PR578A
then remove the inlet boot connecting the inlet duct
to the V-belt housing.
PR140A
PR154A
3
PR150A
PR144B
HDX140A
3-7