Arctic Cat 2013 Prowler XT Service Manual page 116

2. Remove the snap ring securing the water pump drive
idler (B) to the idler shaft; then remove the drive
idler.
3. Remove the snap ring securing the water pump idler
shaft (C) in the crankcase; then remove the shaft and
bearings.
4. Remove the snap ring securing the oil pump driven
gear (D) to the oil pump driveshaft; then remove the
gear. Account for a drive pin and washer.
GZ298
5. Remove the shift fork shaft (E); then remove the gear
shift shaft assembly (F). Account for a flat washer
and a spacer.
GZ299A
6. Remove two cap screws securing the oil pump in the
crankcase and remove the oil pump.
GZ463A
GZ463B
3
DE677A
GZ276
GZ305
3-89