Arctic Cat 2013 Prowler XT Service Manual page 29

Engine/Transmission
This section has been organized into sub-sections which
show a progression for the complete servicing of the Arc-
tic Cat ROV engine/transmission.
To service the center crankcase halves, the engine/trans-
mission must be removed from the frame. To service
top-side, left-side, and right-side components, the
engine/transmission does not have to be removed from
the frame.
 NOTE: Arctic Cat recommends the use of new gas-
kets, lock nuts, and seals and lubricating all internal
components when servicing the engine/transmis-
sion.
 NOTE: Some photographs and illustrations used in
this section are used for clarity purposes only and
are not designed to depict actual conditions.
3-2
 NOTE: Critical torque specifications are located in
Section 1.
SPECIAL TOOLS
A number of special tools must be available to the techni-
cian when performing service procedures in this section.
Refer to the current Special Tools Catalog for the appro-
priate tool description.
Description
Seal Protector Tool
Crankcase Separator/Crankshaft Remover
Magneto Rotor Remover Set
Piston Pin Puller
Secondary Drive Gear Holder
Spanner Wrench
Surface Plate
V Blocks
 NOTE: Special tools are available from the Arctic
Cat Service Department.
p/n
0444-252
0444-152
0444-254
0644-328
0444-253
0544-005
0644-016
0644-535