Arctic Cat 2013 Prowler XT Service Manual page 178

15. Remove the lower differential mounting cap screw.
Account for a lock nut and four washers. Note the
position of the washers for assembling.
16. Remove the upper differential mounting cap screw.
Account for a lock nut and two washers.
17. Free the differential assembly from the frame mount-
ings; then lower the differential through the frame.
Disassembling Input Shaft
1. Using a T-40 torx wrench, remove the cap screws
securing the pinion housing.
PR729B
2. Using a rubber mallet, remove the housing. Account
for a gasket. Remove the fork, collar, and spring.
Note the location of all the components for assem-
bling purposes.
PR205A
3. Remove the snap rings from the input shaft; then
CD016
remove the input shaft from the pinion housing.
GC004A
GC015
6
CD106
GC009A
6-5