Arctic Cat 2013 Prowler XT Service Manual page 138

4. From the opposite side of the vehicle, repeat step 3;
then lift the rear of the floorboard up and lift the
floorboard out of the vehicle.
5. Disconnect the vent hose (A), gasline hose (B), and
fuel pump/fuel level sensor connector (C); then cap
the vent fitting and gas hose fitting.
6. Remove the outer cap screw securing the front tank
hold-down; then swing the hold-down to the left.
PR163
PR164
7. Remove four press-nuts securing the gas cap inset;
then remove the gas cap and inset. Install the gas cap.
PR165
8. Remove the joining cap screw and nut from the rear
gas tank hold-down strap; then remove the inside
hold-down strap.
PR698A
PR167A
4
PR170
PR168
PR699A
4-5