Arctic Cat 2013 Prowler XT Service Manual page 33

5. From the left-side, disconnect the starter wire, alter-
nator connector, and gear position switch connector
(XT); then remove the cap screw securing the main
harness ground and the battery ground wires to the
starter.
3-6
PR155A
6. Remove the E-clip from the transmission shift arm;
then disconnect the cable. Remove the gear position
switch connector (XTZ).
PR157A
7. Remove four machine screws securing the shifter
mount to the frame; then remove the shifter assembly.
PR145A
PR266C
PR474B
PR567A
PR825A
PR596A