Arctic Cat 2013 Prowler XT Service Manual page 56

 NOTE: The sharp side of the snap ring should be
facing outward.
 NOTE: Once the gears are secured, remove the oil
passage plug from the crankcase.
3. Install the two starter gear shafts; then install the two
starter gears (with the beveled side of the intermedi-
ate gear facing inward as noted in removing).
CD946A
4. In order on the crankshaft, install a washer, ring gear,
key, and the magneto rotor. Secure with the nut (threads
coated with red Loctite #271). Tighten to 105 ft-lb.
CD944
5. Install the shift cam plate onto the shift cam shaft;
then coat the cap screw threads with red Loctite #271
and tighten securely.
CD139
PR447A
3
CD948A
CD940B
CD935A
3-29