Arctic Cat 2013 Prowler XT Service Manual page 123

6. Remove the low driven gear. Account for a bearing,
bushing, and thrust washer.
Assembling
1. From the drive gear end, install a thrust washer,
bushing, and bearing; then install the low driven gear
and washer.
3-96
2. Install the low driven gear locking washer; then
install the inner reverse driven gear washer.
GZ318A
GZ316
3. Install the reverse driven bushing and bearing; then
install the reverse driven gear.
GZ317A
4. Install the outer reverse driven washer; then secure
the reverse driven gear assembly with a snap ring.
GZ318
GZ319B
GZ320B
GZ286A
GZ287