Arctic Cat 2013 Prowler XT Service Manual page 102

 NOTE: The starter is not serviceable and must be
replaced as a complete assembly.
3. Remove the rotor/flywheel nut; then install the
appropriate crankshaft protector into the crankshaft.
4. Install Magneto Rotor Remover Set and loosen the
rotor/flywheel; then remove the crankshaft protector
and rotor/flywheel from the crankshaft. Account for
the flywheel key.
GZ224A
5. With the flywheel key removed, remove the starter
ring-gear and spacer washer.
PR440
6. Remove the hose clamps from the water pump; then
remove the coolant hoses from the water pump out-
lets and coolant pipes.
GZ216
GZ217
3
GZ226
GZ249
GZ218
3-75