Printable Area; Standard Printable Area; Extended Printable Area - Fuji Xerox DocuCentre-II C3000 User Manual

Hide thumbs Also See for DocuCentre-II C3000:

Table of Contents

Printable Area

The area on paper that can be printed is as follows.

The standard printable area is an area on paper excluding the 4.1 mm margins on all

four edges of paper. The actual printable area, however, may vary depending on the

printer (plotter) control language.

With the extended printable area setting, the printable area can be extended to

432 mm at a maximum. The un-printable area, however, may vary depending on

the size of paper.

• To extend the print area, change the PCL print driver or the [Print Area] setting on the touch

For the setting method on the printer driver, refer to the online help provided for the print driver. For

more about the setting on the control panel, refer to "Print Area" (P.305).