Fuji Xerox DocuCentre-II C3000 User Manual page 311

Original Type
Set the default value for [Original Type] in the [General Settings] screen.
File Format
Set the default value for [File Format] in the [General Settings] screen.
Lighten/Darken
Set the default value for [Lighten/Darken] of [Lighten/Darken/Contrast] in the [Image Quality]
screen.
Contrast
Set the default value for [Contrast] of [Lighten/Darken/Contrast] in the [Image Quality] screen.
The contrast setting is valid when [Scanning Color] is set to [Color] or [Grayscale].
Sharpness
Set the default value for [Sharpness] in the [Image Quality] screen.
Background Suppression
Set the default value for [Background Suppression] in the [Image Quality] screen.
Shadow Suppression
Set the default value for [Shadow Suppression] in the [Image Quality] screen.
Color Space
Set the default value for [Color Space] in the [Image Quality] screen.
Important • When [Device Color Space] is selected as default and "Color Space" (P.311) is set to [Off],
[Auto] of [Scanning Color] in the [General Settings] screen does not appear.
Original Orientation
Set the default value for [Original Orientation] when scanning.
Scan Resolution
Set the default value for [Scan Resolution] in the [Layout Adjustment] screen.
You can select from 200 dpi, 300 dpi, 400 dpi, and 600 dpi.
Mixed Sized Originals
Set the default value for [Mixed Sized Originals] in the [Layout Adjustment] screen.
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
Edge Erase
Set the default value for [Edge Erase] in the [Layout Adjustment] screen. You can select from
[Normal] or [Edge Erase].
Edge Erase - Top & Bottom Edges
Set the default value for the amount of edges erased from the original in the top and bottom
directions in [Edge Erase] in the [Layout Adjustment] screen. Specify a value from 0 to 50 mm
in 1 mm increments.
Scan Mode Settings
11
309