Entering/Changing Stored Program Name; Assigning/Changing Icons For Stored Programs - Fuji Xerox DocuCentre-II C3000 User Manual

Entering/Changing Stored Program Name

The following is the procedure for entering or changing a name of a stored program.
Up to 18 characters are allowed for a stored program's name.
For information on how to enter characters, refer to "Entering Text" (P.265).
1
Select [Enter/Change Name].
2
Select the number to register or
change a name.
Note • Select [
3
Enter a name, and select [Save].

Assigning/Changing Icons for Stored Programs

The following is the procedure for assigning or changing an icon of a stored program.
Nine icons are available.
1
Select [Assign/Change Icon].
2
Select the number to assign or
change an icon.
Note • Select [
3
Select an icon, and select [Save].
No Icon
No icon is assigned to a registered stored program.
Icon
Select an icon according to the content of the registered stored program.
] to return to the
previous screen or [ ] to
move to the next screen.
] to return to the
previous screen or [ ] to
move to the next screen.
Registering/Deleting/Renaming Stored Programs
7
213