Copy; Reduce/Enlarge (Making Enlarged/Reduced Copies) - Fuji Xerox DocuCentre-II C3000 User Manual

3 Copy

Copy
You can set the basic features on the [Copy] screen. The following shows the reference
section for each feature.
Reduce/Enlarge (Making Enlarged/Reduced Copies) ................................................................52
Paper Supply (Selecting the Paper for Copying) ........................................................................54
Output Color (Selecting the Color to Copy) ...............................................................................56
Image Shift (Shifting the Image Copy Position).........................................................................59
Edge Erase (Erasing Edges and Margin Shadows in the Document) .........................................59
Lighten/Darken (Adjusting the Copy Density)...........................................................................59
1
On the [All Services] screen, select
[Copy].
2
Select features on the [Copy]
screen that appears first.
3

Reduce/Enlarge (Making Enlarged/Reduced Copies)

You can select a ratio to make enlarged or reduced copies.
1
Select the copy ratio from [Reduce/
Enlarge].
100%
Copies are made at the same size as the original document.
Auto %
The copy ratio is automatically set based upon the document and paper sizes specified
in [Paper Supply], and the document is copied to fit in the specified paper size.
Note
Ratio (3rd and 4th buttons)
Select from preset ratios.
You can change the indicated ratios. For information on the settings, refer to "Reduce/Enlarge - Buttons
3 and 4" (P.287).
More...
Displays the [Reduce/Enlarge] screen.
Refer to "When [Preset %] is Selected" (P.53), "When [Variable %] is Selected" (P.53), "When
[Independent X-Y%] is Selected" (P.53), or "When [Calculator %] is Selected" (P.54).
52
• If you select [Auto %], specify a value other than [Auto] for [Paper Supply].