Charge Print - Fuji Xerox DocuCentre-II C3000 User Manual

Charge Print

When you set to use the Charge Print feature under [Charge Print Settings] > [Receive
Protocol], received print jobs are saved for each Billing ID. Any jobs that were not given
a Billing ID on the print driver are saved in [No User ID].
For more information, refer to "Charge Print Settings" (P.350).
The following describes how to print and delete a document saved in Charge Print.
1
Press the <Log In/Out> button.
2
Enter the user ID with the numeric
keypad or the keyboard displayed
by pressing [Keyboard], and select
[Confirm].
3
Select [Charge Print].
4
Select the user to be checked, and
select [Document List].
Note • Select [Refresh] to display the
• Select [
• Entering a 3-digit user ID with the numeric keypad specifies the user directly.
5
Enter the password, and select
[Confirm].
Note • If no password is assigned,
6
Select the document to be printed
or deleted.
7
Select any item.
Delete
Deletes the document stored with Charge Print.
Refer to "When [Delete] is Selected" (P.361).
Print
Prints the document stored with Charge Print.
Refer to "When [Print] is Selected" (P.362).
When [Delete] is Selected
1
Select [Yes].
Yes
Deletes the document.
Important • Once the document is deleted, it cannot be restored.
updated information.
] to return to the previous screen or [
the password entry screen will
not appear.
Printing and Deleting Stored Documents
] to move to the next screen.
12
361