Fuji Xerox DocuCentre-II C3000 User Manual page 445

Symptom
An error Check the positions of the
message paper guides of the Tray 5
appears after (Bypass).
paper is loaded
in the Tray 5
(Bypass) and the
<Start> button is
pressed.
Documents are Are the suitable types of
often jammed. documents used?
Are you trying to copy
irregular shaped
documents, business cards,
transparencies, or thin
documents?
Are you trying to copy
documents with sticky
labels, paper clips or
adhesive tape?
Are the document guides in
the correct positions?
Is a piece of torn paper
remaining in the document
feeder?
Is the [Mixed Sized
Originals] setting set to [On]
when you copy originals of
different sizes?
Is an A5 document loaded
in landscape orientation
( ) on the document
feeder when the Mixed
Sized Originals feature is in
use?
A corner of the Is the document curled?
document is
folded.
Color copies Is [Output Color] set to
cannot be made. [Black]?
Is a message displayed on
the touch screen, prompting
you to replace the toner
cartridge?
Stapler Faults -
Cause
Adjust the paper guides to the correct
positions.
Refer to "Loading Paper in the Tray 5
(Bypass)" (P.243).
Correctly load documents suitable for the
document feeder.
Refer to "Step 1 Loading Documents" (P.44).
Remove sticky labels, paper clips or
adhesive tape from the document before
copying.
Adjust the document guide positions.
Refer to "Step 1 Loading Documents" (P.44).
Open the document feeder cover and
check inside.
Refer to "Document Jams" (P.515).
Set [Mixed Sized Originals] to [On].
Refer to "Mixed Sized Originals (Scanning
Different Size Documents Simultaneously)"
(P.69).
Load the A5 document in portrait
orientation ( ).
Flatten out the curl and load the document
again.
Select [Color] for [Output Color].
Refer to "Output Color (Selecting the Color to
Copy)" (P.56).
Replace with the toner cartridge of the
color indicated in the message.
Refer to "Replacing Consumables" (P.412).
Refer to "Stapler Faults" (P.517).
Machine Trouble
Remedy
443
16