Resolution (Specifying The Scanning Resolution) - Fuji Xerox DocuCentre-II C3000 User Manual

Text
Select this item when transmitting a document that contains only text.
Photo & Text
Select this item when transmitting a document that contains both text and photos. The
machine automatically distinguishes the text and photo areas and sets the appropriate
image quality for each area of the document.
Photo
Select this item when transmitting documents that contain only photos.
Note • Stripes may appear in the photo image sections if a setting such as scanning at a reduced

Resolution (Specifying the Scanning Resolution)

You can set the resolution for the documents to be scanned.
Note • The [Resolution] can be set individually for each address number. For information on how to
• The machine scans a document at the specified resolution, but if a machine of the recipient
• The higher the resolution, the lower the transmission speed. Usually, we recommend using
1
Select the resolution.
Standard
Select this item when transmitting documents with easily legible text.
(Approx. 200 x 100 dpi/25.4 mm)
Fine
Select this item when transmitting documents with small text and/or detailed images.
(Approx. 200 x 200 dpi/25.4 mm)
Superfine (400dpi)
Select this item when transmitting documents with extremely fine text and/or images.
(400 x 400 dpi/25.4 mm)
Superfine (600dpi)
Select this item when transmitting documents with extremely fine text and/or images.
(600 x 600 dpi/25.4 mm)
size was specified.
register address numbers, refer to "Address Book (Address Number)" (P.336).
does not support the resolution, the machine automatically changes the resolution to one
supported by the recipient's machine and there is a corresponding loss in quality.
[Superfine (400dpi)] or lower.
General Settings
4
119