Fuji Xerox DocuCentre-II C3000 User Manual page 505

Category
Error Code
C P F S M O
093-418
093-419
093-420
093-421
093-423
093-424
093-425
094-417
094-418
094-419
094-420
094-421
094-422
116-324
O
116-701
O O
116-702
O
116-703
O
Cause and Remedy
O [Cause] It is time to replace the developer (yellow).
[Remedy] Contact our Customer Support Center or customer
engineer.
O [Cause] It is time to replace the toner cartridge (magenta).
[Remedy] Contact our Customer Support Center or customer
engineer.
O [Cause] It is time to replace the toner cartridge (cyan).
[Remedy] Contact our Customer Support Center or customer
engineer.
O [Cause] It is time to replace the toner cartridge (black).
[Remedy] Contact our Customer Support Center or customer
engineer.
O [Cause] It is time to replace the toner cartridge (yellow).
[Remedy] Replace the toner cartridge (yellow) with a new one.
O [Cause] It is time to replace the toner cartridge (magenta).
[Remedy] Replace the toner cartridge (magenta) with a new one.
O [Cause] It is time to replace the toner cartridge (cyan).
[Remedy] Replace the toner cartridge (cyan) with a new one.
O [Cause] It is time to replace the transfer belt.
[Remedy] Replace the transfer belt with a new one.
O [Cause] It is time to replace the transfer cleaning belt.
[Remedy] Replace the transfer cleaning belt with a new one.
O [Cause] It is time to replace the second bias transfer roll.
[Remedy] Replace the second bias transfer roll with a new one.
O [Cause] It is time to replace the transfer belt.
[Remedy] Replace the transfer belt with a new one.
O [Cause] It is time to replace the transfer cleaning belt.
[Remedy] Replace the transfer cleaning belt with a new one.
O [Cause] It is time to replace the second bias transfer roll.
[Remedy] Replace the second bias transfer roll with a new one.
[Cause] An error occurred on the machine.
[Remedy] Turn the machine power off. Then, turn the machine power
on while pressing both the <Start> and <Stop> buttons,
and keep pressing the buttons for six seconds. The
machine will delete the print data causing the error, and
will start up.
[Cause] Unable to use the 2-sided printing feature due to
insufficient memory.
[Remedy] Add on memory, or attach a HDD if it is unattached.
[Cause] Printing was performed using a substitute font.
[Remedy] Check the print data.
[Cause] An error occurred during PostScript (optional) processing.
[Remedy] Either check the print data, or click [Spool Settings] on the
[Details] tab in the print driver to set bi-directional
communication to off.
Error Code
16
503