Fuji Xerox DocuCentre-II C3000 User Manual page 474

16 Problem Solving
Error Code
016-726
016-727
016-728
016-729
016-731
16
016-732
016-733
016-734
016-735
016-736
472
Category
C P F S M O
O [Cause]
[Remedy] For Cause 1:A PostScript 3 Kit must be installed.
O [Cause]
[Remedy] The document could not be stored into the mailbox
O [Cause]
[Remedy] Check the print data.
Refer to "Layout Adjustment" (P.187).
O [Cause]
[Remedy] Change the number of colors/resolution for the TIFF file,
Refer to "Layout Adjustment" (P.187).
O [Cause]
[Remedy] Retry printing.
O [Cause]
[Remedy] Resend the form data.
O O [Cause]
[Remedy] For Cause 1: Check the e-mail address.
O [Cause]
[Remedy] Set the e-mail reception setting to [STMP reception] on the
O O [Cause]
[Remedy] Retry printing after waiting for a while.
O [Cause]
[Remedy] Take one of the following actions:
Cause and Remedy
Unable to automatically select a printer language even
though the print mode is set to [Auto].
Probable causes are as follows:
1. PostScript data was sent with no PostScript 3 Kit
(optional) installed.
2. The PDF file was sent directly to the machine using LPR
with PostScript 3 Kit installed and no HDD installed.
For Cause 2:A HDD must be installed.
A job was cancelled without storing a document into a
mailbox because the document was determined as 0
page.
because the machine determined the print document as 0
page. Disable [Skip Blank Pages] on the Print Options
setting, or add text to the document if the document is
blank.
An unsupported tag is included in the TIFF file.
Unable to print because the number of colors or the
resolution of the TIFF file is out of allowed range.
and try again.
Unable to print TIFF data because it was interrupted.
The form specified by the emulation has not been
registered at the host side.
1. Unable to obtain the IP address (the string after "@" in
the destination e-mail address) when sending e-mail.
2. Unable to resolve the Internet address (the string after
"@") by the DNS server when sending e-mail.
For Cause 2: Check the DNS server address.
Failed to print the simple address result report.
sender's machine.
Attempted to print [Job Template List] while updating the
job template.
Any data cannot be saved in the forwarding destination
directory.
1. Check the free space of the forwarding destination disk.
2. Check to see whether you have privileges for the
forwarding destination directory.
3. Delete a ".LCK" file from the forwarding destination
directory.