Reply To (Set The Address For Reply); File Name Conflict (Setting Procedures When A File Name Conflicts With Others) - Fuji Xerox DocuCentre-II C3000 User Manual

5 Scan
To set the file name
1
Select [File Name].
2
Enter a name of up to 128 characters using the displayed keyboard.
For information on how to enter characters, refer to "Entering Text" (P.265).
Note

Reply To (Set the Address for Reply)

When using the [E-mail] feature, you can specify the address for reply.
1
Select [Reply To].
2
Enter an address for reply.
Clear Field
Deletes the address entered in [Reply To].
Reply To Me
The address set for [From] is set as a reply address.
Note
Address Book
5
Select the sender's E-mail address from the Address Book.
Refer to "Address Book" (P.165).
File Name Conflict (Setting Procedures When a File Name conflicts with
others)
When using the [Scan to FTP/SMB] feature, you can set the action to be taken when
the file name conflicts with another file stored in the destination.
1
Select [File Name Conflict].
2
Select any item.
Cancel Job
The job is canceled and the file is not saved.
Change Name and Save
The file name is automatically changed and saved. The machine adds a number (0001
- 9999) to the end of the file name.
Overwrite Name and Save
The existing file is replaced with the new one.
194
• When saving each page as one file, the page number is added to the end of each file name.
• This button is enabled only when an address is set for [From] on the [E-mail] screen.