Fuji Xerox DocuCentre-II C3000 User Manual page 152

4 Fax
Auto Send (transmitting without picking up the receiver)
1
Select [Keyboard] to display the keyboard on the touch screen and enter the following
format.
2
Select [Next Recipient] to perform Multiple Relay Broadcast.
Password
A pre-registered two-digit number
Note
Relay Station ID
The last two digits of the initiating station address number registered at the primary
relay station.
Address Number
The address number for the secondary relay station registered at the primary relay
station.
Manual Send (transmitting with picking up the receiver or on-hook)
4
1
Display the [Advanced Fax
Features] screen by selecting the
[Advanced Fax Features] tab.
2
Select [On-hook (Manual Send/
Receive)].
3
Select [Manual Send].
4
Select [Alphanumeric] or [Symbol].
5
Use the keyboard shown in the touch screen to enter the following format.
Note
F Code Method
When using the machine as the initiating station for performing remote Relay Broadcast
Send, confirm the F Code and the password (if necessary) for the primary relay station.
When using the machine as the primary relay station for performing remote Relay
Broadcast Send, inform the initiating station of the F Code (sub-address) and the
password (if necessary) and confirm the F Code for the secondary relay station.
When using the machine as the secondary relay station for performing remote Relay
Broadcast Send, inform the primary relay station of the F Code and the password (if
necessary).
150
• By default, no password is set. For setting a password, contact our Customer Support
Center. If a password has not been set, you do not need to enter one.
• You can specify up to 20 locations for relay recipients.