Fuji Xerox DocuCentre-II C3000 User Manual page 335

Send as iFax
Specify an address for iFax transmission.
You can specify a total of up to 100 addresses, using either address numbers or direct input.
Important • It is not possible to use wildcard or group dial number specifications.
Address Number
Specify an address with an address number. Enter the address number with the numeric
keypad, and select [Save]. The specified address appears in [Recipient Name/E-mail
Address] on the [4. Send as iFax] screen.
New Recipient
Specify a new address. Select the item you want to change, and select [Change Settings].
The specified address appears in [Recipient Name/E-mail Address] on the [4. Send as iFax]
screen.
Delete Recipient
Deletes all information for the selected addresses.
Change Settings
Confirm or change the selected recipients.
For information about the method for confirm/change, refer to "Address Book (Address Number)"
(P.336).
Send as E-mail
Specify the recipients for e-mail transmission.
You can specify a total of up to 100 addresses, either selecting from the address book
or by direct input.
Note • If [On] for [Encryption] in the [Detailed Settings] screen has been selected, you cannot
specify a recipient by selecting [New Recipient].
• If selecting [On] for [Encryption] in the [Detailed Settings] screen, enable this item before
specifying the recipients. You cannot select [On] for [Encryption] after specifying the
recipients.
Address Book
The recipients can be specified from address book. The specified address appears in
[Recipient Name/E-mail Address] in the [5. Send as E-mail] screen.
New Recipient
Specify a new address. Select the item you want to change, and select [Change Settings] to
set. The specified address appears in [Recipient Name/E-mail Address] in the [5. Send as E-
mail] screen.
Detailed Settings
Set the subject, output file format, encryption, and digital signature. Select the item you want
to change, and select [Change Settings] to set.
Note • If selecting [On] for [Encryption], enable this item before specifying the recipients. You
cannot select [On] for [Encryption] after specifying the recipients.
Delete Recipient
Deletes all information for the selected recipients.
Change Settings
Confirm or change the selected recipients.
For information on the settings, refer to "Address Book (Address Number)" (P.336).
Transfer via FTP (1), Transfer via FTP (2)
Note • Transfer via FTP (2) will appear when Transfer via FTP (1) is configured.
Setup Menu
11
333