Fuji Xerox DocuCentre-II C3000 User Manual page 495

Category
Error Code
C P F S M O
034-529
O
034-530
O
034-702
O
034-703
O
034-704
034-705
034-706
034-707
O
034-708
034-709
034-710
034-711
034-712
034-713
034-714
034-715
034-716
034-717
034-718
034-719
034-720
034-722
034-724
034-725
034-726
034-728
O
034-730
O
037-732
034-738
O
034-739
Cause and Remedy
[Cause] Paper with the same size as the received document is not
loaded on the machine.
[Remedy] Check the following:
Check the sizes of paper loaded on the machine.
Check if the paper trays are correctly inserted.
[Cause] Operation time out
[Remedy] Operate within a specified time.
[Cause] Unable to communicate due to an incorrect phone number.
[Remedy] Check the phone number, and try again. If an abbreviated
number is used for the phone number, check the
registered phone number.
[Cause] The phone cable is not correctly connected.
[Remedy] Check the phone cable connection, and send the fax
again. If the machine conditions are not improved by
performing the relevant remedy, contact our Customer
Support Center.
[Cause] An error occurred during fax transmission.
[Remedy] Check the settings and the phone number, and send the
fax again. If the machine conditions are not improved by
performing the relevant remedy, contact our Customer
Support Center.
[Cause] Unable to communicate due to an incorrect phone number.
[Remedy] Check the phone number, and try again.
If DP (dial pulse) is used for G3, check that "∗" and "#" are
not included in the phone number.
Refer to 034-508.
[Cause] The phone cable is not correctly connected.
[Remedy] Check the phone cable connection, and send the fax
again. If the machine conditions are not improved by
performing the relevant remedy, contact our Customer
Support Center.
Error Code
16
493