Fuji Xerox DocuCentre-II C3000 User Manual page 149
Hide thumbs
Also See for DocuCentre-II C3000:
- Quick user manual (44 pages) ,
- Network administrator's manual (163 pages)
Table of Contents
Advertisement
Note
• You can specify up to 20 locations for relay recipients.
F Code Method
When the machine is an initiating station, you can perform Relay Broadcast Send if the
F Code that has been set for the relay station and the password (if necessary) are
registered on the machine.
When the machine is a relay station, you can perform Relay Broadcast Send if the F
Code that has been set for the initiating station and the password (if necessary) are
registered on the machine.
Important • When performing Relay Broadcast Send with the F Code method, you can use a password if
Note
• When performing Relay Broadcast Send with machines of this model, we recommend using
• When using a machine of a different model as a relay station, confirm the F Code (sub-
When using the machine as a relay station, the F Code that is transmitted to the
initiating station is as follows.
Relay Broadcast
Send
Relay Broadcast Send
Number of digits of the relay station ID:
1: For relay station IDs and address numbers that are 2 digits
2: For relay station IDs and address numbers that are 3 digits
Print Directive
Existence of printing at the relay station
1: Printing at the relay station
0: No printing at the relay station
Relay Station ID
An address number for an initiating station registered at the relay station.
When the relay station ID is set, the initiating station is notified of the results of a Relay
Broadcast Send.
When the relay station ID is "00" or "000", the initiating station is not notified of the
results of a Relay Broadcast Send.
Address Number
The address number assigned to the relay recipient.
The following shows an example of F Code that indicates printing at the relay station,
notifying the initiating station (100) of the results, and performing Relay Broadcast
Send to relay recipients (200, 201, 202 and 203).
F Code Example: 21100200201202203
you set a receive password for the relay station.
the fax signal method.
address) and password of the target recipient machine.
Print
Relay
Directive
Station ID
Up to 20 digits
Address
Address
Address
Number
Number
Number
Broadcast
....
4
147
Advertisement
Table of Contents
