File Destination/Output Destination - Fuji Xerox DocuCentre-II C3000 User Manual

11 System Settings
Cancel Job
The stored data is discarded.
Run Job
The read-in data is treated as valid, and the part of the original read in is treated as a
complete stored file.
Maximum Stored Pages
Specify the maximum number of stored pages of a fax original. You can set a number from 1
to 999 pages.
Mailbox Receive Display Priority 1 to 5
Set the display priority for documents received using mailboxes. The priority levels are from 1
to 5, and each setting takes these values. For each item, the same setting as another item
can be set.
11
Note

File Destination/Output Destination

File Destination/Output Destination allows you to specify a method for classifying
received documents into specified mailboxes. This setting is used for the box selector
feature.
File Destination - Line Setup
Classifies received documents by line type and stores the documents in specified mailboxes.
1
Select [File Destination - Line
Setup].
2
Select the line you want to register,
and select [Change Settings].
Note
3
Select [On].
4
Enter the mailbox number (3-digits)
where you want to store the
documents, with the numeric
keypad.
5
Select [Save].
Output Destination - Line Setup
In [Output Destination - Line Setup], you can set the output destination for each receiving line,
and the destination for a mailbox print.
Note
318
• This feature is not available for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
• The displayed items may be
different, depending on the
options installed.
• This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
• The displayed items may be different, depending on the options installed.