Set System - HP P2000 G3 Cli Reference Manual

set system

Description Sets the system's name, contact person, location, and description. Each value can include a
maximum of 79 bytes, using printable UTF-8 characters except left angle bracket, backslash, or
double quote. A value that contains a space must be enclosed in double quotes.
The name, location, and contact are included in event notifications. All four values are included in
system debug logs for reference by service personnel. When using the WBI, the system name
appears in the browser title bar or tab.
Syntax
set system
[name value]
[contact value]
[location value]
[info value]
Parameters name value
A name to identify the system.
contact value
The name of the person who administers the system.
location value
The location of the system.
info value
A brief description of what the system is used for or how it's configured.
Example Set the system name to Test and the contact to J. Doe:
# set system name Test contact "J. Doe"
Success: Command completed successfully. (2012-01-21 14:42:12)
See also • show system
HP P2000 G3 MSA System CLI Reference Guide 183