HP P2000 G3 Cli Reference Manual page 65

level monitor|manage
Optional.
• monitor: User can view but not change system settings. This is the default.
• manage: User can view and change system settings.
locale English|en|Spanish|es|French|fr|German|de|Italian|it|Japanese|ja
|Korean|ko|Dutch|nl|Chinese-simplified|zh-s|Chinese-traditional|zh-t
Optional. The display language. The default is English.
password password
Optional in console format; required for XML API format. Sets a new password for the user. If this
parameter is omitted, the command prompts you to enter and re-enter a value, which is displayed
obscured for security reasons. For an SNMPv3 user whose authentication-type parameter is set to use
authentication, this specifies the authentication password. For user password rules, type help
syntax.
precision #
Optional. Sets the number of decimal places (1–10) for display of storage-space sizes. Default is 1.
privacy-password encryption-password
Optional. For an SNMPv3 user whose privacy-type parameter is set to use encryption, this
specifies the encryption password. For user password rules, type help syntax.
privacy-type DES|AES|none
Optional. For an SNMPv3 user, this specifies whether to use a security encryption protocol. This
parameter requires the privacy-password parameter and the authentication-type
parameter.
• DES: Data Encryption Standard.
• AES: Advanced Encryption Standard.
• none: No encryption. This is the default.
storage-size-base 2|10
Optional. Alias for base.
storage-size-precision #
Optional. Alias for precision.
storage-size-units auto|MB|GB|TB
Optional. Alias for units.
temperature-scale celsius|c|fahrenheit|f
Optional. Sets the scale for display of temperature values:
• fahrenheit or f: Temperatures are shown in degrees Fahrenheit.
• celsius or c: Temperatures are shown in degrees Celsius. This is the default.
timeout #
Optional. Sets the timeout value in seconds for the login session. Valid values are 120–43200
seconds (2–720 minutes). The default is 1800 seconds (30 minutes).
trap-host IP-address
Optional. For an SNMPv3 user whose interface parameter is set to snmptarget, this specifies
the IP address of the host that will receive SNMP traps.
type novice|standard|advanced|diagnostic
Optional. Identifies the user's experience level. The default is standard.
HP P2000 G3 MSA System CLI Reference Guide 65