HP P2000 G3 Cli Reference Manual page 145

Hide thumbs Also See for P2000 G3:

Table of Contents

Example Manually set the system time and date to 1:45 PM on September 22, 201 1:

# set controller-date sep 22 13:45:0 2011

Success: Command completed successfully. - Date/Time successfully set.

(2011-11-02 13:45:03)

Manually set the system date and time to 4:30:50 PM on November 2, 201 1 by specifying a

timestamp and an offset for the Central Time zone:

# set controller-date timestamp 1320273050 timezone -6

Success: Command completed successfully. - Date/Time successfully set.

(2011-11-02 16:30:53)

Set the system to use NTP with an offset for the Mountain Time zone:

# set controller-date ntp enabled ntpaddress 69.10.36.3 timezone -7

Success: Command completed successfully. - Date/Time successfully set.

(2011-11-02 12:15:22)

Set the system to use NTP with an offset for the Bangalore, India, time zone:

# set controller-date ntp enabled ntpaddress 69.10.36.3 timezone +5:30

Success: Command completed successfully. - Date/Time successfully set.

(2011-11-02 23:00:02)

Table of Contents