HP P2000 G3 Cli Reference Manual page 513

Table 95 volumes properties (continued)
Name Type
volume- string
qualifier-
numeric
blocks uint64
capabilities string
volume-parent string
snap-pool string
replication-set string
attributes string
virtual-disk- string
serial
volume- string
description
wwn string
progress string
progress- string
numeric
container-name string
container- string
serial
health string
health-numeric string
health-reason string
health- string
recommendation
Description
Numeric equivalents for volume-qualifier values.
•
0: N/A
•
2: RSR
•
6: RSR (DRM Promoted Secondary)
Unformatted size value in 512-byte blocks.
For internal use only.
Parent volume serial number. For example, the serial number of a snapshot's
master volume.
Snap pool serial number.
Replication set serial number.
Shows whether the volume's disks are single pathed.
Vdisk serial number.
• For OpenVMS, a numeric value (set with create volume or set volume) that
identifies the volume to an OpenVMS host.
• For HP-UX, a text value (set in-band by a host application) that identifies the
volume.
• Blank by default.
World Wide Name of the volume, used by host-based Storage Replication
Adapter (SRA) software to identify the volume.
For a volume-copy operation, the percent complete (0%–99%). The default value
is 0%.
Unformatted progress value.
Vdisk name.
Vdisk serial number.
•
OK
•
Degraded
•
Fault
•
Unknown
Numeric equivalents for health values.
•
0: OK
•
1: Degraded
•
2: Fault
•
3: Unknown
If Health is not OK, the reason for the health state.
If Health is not OK, the recommended actions to take to resolve the health issue.
HP P2000 G3 MSA System CLI Reference Guide 513