HP P2000 G3 Cli Reference Manual page 241

PIP-Gateway
iSCSI only. Primary gateway IP address.
PIP-Netmask
iSCSI only. Primary subnet mask IP address.
MAC
iSCSI only. Unique Media Access Control (MAC) hardware address, also called the physical
address.
SIP
iSCSI only. Secondary IP address. This field is only displayed during failover.
SIP-Gateway
iSCSI only. Secondary gateway IP address. This field is only displayed during failover.
SIP-Netmask
iSCSI only. Secondary subnet mask IP address. This field is only displayed during failover.
MAC(S)
iSCSI only. Secondary MAC address. This field is only displayed during failover.
Example Show port information for a system with two FC ports:
# show host-parameters
Ports Media
Health Reason
-----------------------------------------------------------------------------
A1 FC(L)
OK
Topo(C) PID
------------
Loop
A2 FC(-)
There is no host connection to this host port.
Topo(C) PID
------------
Loop
-----------------------------------------------------------------------------
Success: Command completed successfully. (2012-01-18 15:03:24)
Target ID
WWPN
0
WWPN
0
Status Speed(A) Speed(C)
Health Recommendation
Up 8Gb
Disconnected
- No action is required.
HP P2000 G3 MSA System CLI Reference Guide 241
Health
Auto OK
Auto N/A